Vincent March 13, 2012 for Model Number WFR2460 UC/01 I work for an appliance repair service and have a customer who needs this part and his serial number starts with FD 8202. Will this work with his machine or does his serial number have to start with FD 8201? Thanks, have a good day.
1 Answer Vincent, searching the manufacturer site information the replacement control module 00494093 is the correct replacement module used on your model WFR2460UC/01. Thanks! Read More...
John G. February 06, 2012 for Model Number Axxis + WFR 2460 How hard is it to replace control module ?
1 Answer Hi John. Remove the power. remove the 3- rear top screws and push back and up on the top to remove it. Remove the dispenser assy. Remove the front dispenser screws. Open the door, look up at the 12:00 position and see if your model has a hidden screw holding the bottom of the front panel on. The familiarize yourself w/ the tabs/ and screws holding the front panel on. Release all electrical connectors that unplug the board. Then lay the front of the fascia on a towel and slowly lift the board from the back area. This will lessen the chance of button springs and light tubes falling out. Take note of connections and the button positioning. The control assy. part # 00494093. Do not touch the board, remember to ground yourself out on bare metal so the static grounds itself out a few times so you do not induce static into the new board and ruining it. Thank You. Read More...