Jim May 16, 2023 for Model Number WAS20160UC/23 When pumping water out of drum the machine makes a groaning sound like a bearing is bad, it only makes that noise when it's pumping the water out. What could be causing this?
1 Answer Jim, This issue will most likely be caused by a faulty drain pump that will need to be replaced. Read More...
Deb May 16, 2023 for Model Number WAP24200UC/05 Does this pump have a filter and if so, how to get to it to clear it out?
1 Answer Deb, This pump does have filter and you would just unscrew it and pull it out to clean it. Make sure that you use a shop vac to get any water out first. Read More...
Jesse Sieger December 15, 2014 for Model Number WAS20160UC/16 Hi I know my drain pump needs to be replaced with part number 00144977. The problem is the power connector to the drain pump looks like it shorted out and fried, it fell off the two black power wires that were going into it. I cannot seem to find part to replace either the plastic cable connector or the entire cable run that goes into the drain pump. Thank You!
1 Answer Hello Jesse, I'm sorry but the only information I could locate on this harness 00552829 00552829 is that it has been discontinued. I would recommend trying to repair the existing one. Read More...
James P July 15, 2014 for Model Number WAS20160UC/01 Could you give me the instructions on how to remove the hoses and then the pump and then install it all back?
1 Answer Hello James. You can remove the back access panel and the front toe panel on the washer. Then you can access the hoses. Remove the clamps and pull off the hoses. Next unplug the pump and remove it from the cabinet. Install the new pump in reverse order. Read More...
Chih-Te C. February 27, 2014 my washing machine is "Bosch WAQ28441/12" from Germany. Due to the change of dewelling place, my request is to survey a substitute drain pump which can work under 220V, 60Hz. My original drain pump is normal function (unfortunately, only working under 220V, 50Hz). Please help me to confirm Your product: the drain pump "00144977" whether accord with 220V, 60Hz. Please let me know of your suggestions, if any else. Because I think my require is only to drain water from the machine. If the latter part of pump (black color) is not fixed with the machine casing, it could be also fine! Thank you for you help.
1 Answer Hello Chih-Te! Unfortunately, we can not confirm that this drain pump is listed for your model as the manufacturer does not provide this information. However, the drain pump is a 208-240v pump. Thanks! Read More...