Tom May 14, 2014 for Model Number thermador prg304 gas range My 14 year old Thermador gas range two left XLO burners have stopped working, both burners do not release gas, both burners have spark. The right front stopped working 6 mos ago, and the rear just stopped last week. Thank you
1 Answer Hello Tom, This is going to be either the gas valves 00415499 or the solenoid 00411253. Read More...
65Roadster April 16, 2014 for Model Number PRSE364GDS Is this kit compatible with my range?? Neither of my xlo burners flow gas but the igniters do work. Thanks, Chris
1 Answer Hello! No, part number 00497234 is not compatible with your unit. The simmer control listed for your model is part number 00422882. Thanks! Read More...
Kirk January 27, 2014 for Model Number Prse48 All of the igniters spark unless the left rear simmer burner is turned on or the power to the unit is turned off. I unplugged the wires from the control to the burner and it seemed to fix the problem. What do I need to replace?
1 Answer Hello Kirk, This sounds like the simmer control has failed. This has to be changed with a complete kit, since the potentiometers have been redesigned and the old ones will not operate properly with the new controller. You will need to order and install part number 00497234. Read More...
Jim P. January 18, 2014 for Model Number PCS484WKUS s/n99030147F I wanted to confirm that this kit is compatible with my cook top: http://www.appliancepartspros.com/bosch-simmer-control-kit-497234-ap3872617.html I'm certain that the simmer control unit is correct... ...but I'm particularly concerned about the black plastic backings on the potentiometers and if they will fit my 12 year old rangetop (I see a different type here: http://www.appliancepartspros.com/bosch-potentiometer-kit-497235-ap3872616.html) If you can confirm it'll save us both the trouble of a return ;-) Thanks in advance! Jim
1 Answer Hello Jim, As per the technical service bulletin from Thermador, you are correct and this is the correct simmer control kit 00497234. Read More...
Rob July 18, 2012 for Model Number PRG486GDUS 4 sparkers keep sparking, only way to get this to stop it by shutting the breaker off.
1 Answer Hello Rob. Based on the information you provided, it sounds like the spark module 00753257 is bad and will need to be replaced in the unit. Read More...