Steve G. October 11, 2013 for Model Number SHX33A05UC/46 Dishware and silverware weren't getting clean on the lower rack. One side of the lower spray arm is hitting the pipe that connects the lower and upper arms. I assume that eventually it gets stuck there. Apparently the arm warped from heat. Is this a common issue and is replacing the arm the solution?
1 Answer Hello Steve. In the past, this has happened and if the arm is warped, you will need to replace it. Read More...
Alan November 29, 2012 for Model Number Bosch dishwasher - she43 (evolution) I just removed the upper and lower spray arms for cleaning. Both arms had several holes clogged up with a yellowish material that looked like a gasket material that had disintegrated. At first I thought maybe there used to be some sprayers in the arm holes that broke down, but from drawings that does not seem to be the case. Any idea how this might have gotten there? Or any idea what it is? I have cleaned the arms and replaced for now, but would like to replace this gasket if you have an idea where it came from. The dishwasher is about 1.5 years old. Thanks a lot for your help. I really appreciate it! Alan parts 448806 and 676933
1 Answer Hello Alan, Unless the unit has bee over soaped and the dishes pre-rinsed, which would cause the chemical reaction to attack the rubber gaskets in the unit in addition to etching the glassware and removing patterns from plates, I would suspect that something has been put in the dishwasher, (normally unintentionally), that has made its' way into the spray arms. This is not uncommon since things on the counter can fall into the unit while the unit is opened for loading. After reviewing the model number and the parts associated, it looks like all of the gaskets for this unit are black rubber. I seriously doubt that the material in the spray arms is from the unit itself. Read More...