Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Control Bezel, Black (Rsd30/Rse30) by Dacor

Best Seller
Manufacturer Part
4.89 (64)
By: Dacor
Part Number: OEM11565390
Manufacturer Part Number: 76480B

Black bezel for range (RSD30/RSE30).

More

Questions & Answers

For Dacor Control Bezel, Black (Rsd30/Rse30) (Part Number: OEM11565390)

Joe for Model Number Dacor RSD30, I think.

The F1 sinnal has come on. One other time a few months ago it came on and I shut of the main power supply breaker and turned it back on and the F1 signal didn't occur. It seemed to 'reset' itself. Yesterday it happened again but will not go away. I shut of the power supply and disconnected the ribbon wire to the touch pad assembly and turned the power supply back on and the F1 signal HAS NOT reoccurred. Does that indicated that I need the 76480B part? Thanks for help.

1 Answer

Kim,

With the display and oven not working, the issue would most likely be caused by a faulty control DE81-09179A. There is power going into the control board but not coming out for the display or the oven.

Read More...

1 Answer

Alex,

You will want to check the owners manual and see if there is a demo mode or a Sabbath mode on your unit and make sure that it is not in that mode. If not then the most likely cause would be the control board failure.

Read More...

1 Answer

Hello Jennifer,
I'm sorry but this part has been discontinued by the manufacturer and no satisfactory substitutions have been provided. You can check with corecentricsolutions.com to seer if they support this control board. If so, they can rebuild it for you.

Read More...
John for Model Number DACOR RSD30B

The bezel control assembly P/N 76480B on my range is cracked in several locations and will need to be replaced. Until recently, all functions were working properly. Now when I turn on one of the stove top burners, the auto igniters continue to spark for extended periods, even after the flame is lit, or they seem to spark for the wrong burner. Is this feature controlled through the board on the bezel control assembly, so that it will be corrected when I replace that, or is there something else I need to look at as well?

1 Answer

John,

Based on the igniter continuing to spark and the wrong igniter sparking would most likely be cause by a faulty spark module DE81-03926A.

Read More...

1 Answer

Hello Rick,

While we do not have instructions for replacing the Control bezel 76480B it can be done by consumers. Pay close attention to how it comes apart and maybe write down how you removed each component and what order you took them off in.

Read More...

1 Answer

Kevin, the black bezel is part number 76480B. The manufacturer only offers the bezel with the touch pad assembly. Sorry about that!

Read More...

1 Answer

Hi Jen, the control panel (bezel) assembly 76480B is the main control panel and includes the switch membrane (touchpad). You can but the switch membrane 82063B separately. The oven control 62692 is behing the control panel and is a separate part. Hope this helps!

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google