Frederick April 19, 2023 for Model Number fra106ht1 Hi ac will not power on when i plug it in ac will beep and the lights on the control board light up then go out could it be a bad control board. Thanks
1 Answer Frederick, if there is not a shorted wire, based on the information provided, the most likely failure would be the control 5304537405. Read More...
Scott July 08, 2022 for Model Number FRA12YHT2 The FAN SPPED on thsi thru-wall unit will only operate on the HIGH setting.. cannot select Med or Low on the manual key pad or with the remote. Other keypad functions are ok, cooling, on/off etc. Scott
1 Answer Hello Scott, the fan speed relay for the high setting is stuck closed on the control board, the board is part 5304476450 but it is no longer available from the manufacturer. Read More...
Charles June 20, 2020 for Model Number Frigidaire FRA124HT2 air conditioner The condenser will not shut off unless I unplug the unit from the socket. I think it might me a bad contactor relay but I'm not sure what parts to replace.
1 Answer Charles, Based on the information provided the mainboard part number is 5304476450 Read More...
Anthony June 01, 2019 When I plug in my Frigidaire a/c the a/c beeps all lights flash for a second then nothing works .The a/c is 1 year old .
1 Answer Anthony, This issue would most likely be caused by a faulty main control board. Read More...
Michael Kolpien September 08, 2018 for Model Number FRA124HT2 My air conditioner will not turn on all the time unless u hit the on button several times?
1 Answer Michael, it sounds like you have a bad keypad, you will need part number 5304476615 Read More...
Bruce August 16, 2018 for Model Number Fridigaire FRA106HT1 My A/C won't turn off unless I trip the test switch on the plug. When It is on it acts erratically and not all the functions work. I assume I need a new board, however which board should I order, the AP4513681, or the AP4396813?
1 Answer Bruce, You would want to check or replace the 5304537405/5304471197 PC Board, Input/Display. The board circuitry and tracers could have failed, or one of the "mini switches has failed and is applying a constant circuit, causing the erratic operation. The part is in stock and available at this time. Thanks, Read More...
Marty January 17, 2015 for Model Number FRA10EHT20 My unit will not turn off and keeps putting out heat even when you turn ff swich on main unit or remote.. I can set temp at lowest setting but continues to blow heat. No control of setting temp. I pulled plug after 30 min as room was getting to warm. Thank you.
1 Answer Marty, This issue would most likely be caused by a faulty control board which would need to be replaced. Read More...