Joe May 23, 2011 for Model Number fefl78cqa Oven showed a f1 fault, unplugged for several hours and re plug same error code and also says door lock.
1 Answer Hello Joe. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/23858-eoc-board-stove.html Read More...
Kerry May 01, 2011 for Model Number FELF78CBC Is that always the case that when replacing the clock part that you must replace the overlay as well? Out of curiosity could you please tell me the reason? Thanks for your help in answering my questions!
1 Answer Hello Kerry. Frigidaire does not attach the overlay to their clocks. You can try to remove the old one from the old clock assembly, but usually it does not stick very well. They recommend replacing the overlay when you replace the clock. Hope this helps. Read More...
Sharon April 06, 2011 for Model Number GSE3WZCCB Same problem as other 3 questions. Voltage is fine. How difficult is it to install new clock and overlay?
1 Answer Hello Sharon. These are not to hard to install. You will need to remove the back of the control panel to access the clock. Once inside, you will disconnect the wires to the old clock, and remove the old clock. Then reinstall in reverse order. Make sure you put the wires on the new clock in the correct location. You will need to order a new overlay 316220805 as well. Hope this helps. Read More...
Doug March 21, 2011 for Model Number FEF379ACL Same situation as other two, but I have power at L2. There was a pop from oven and blew breaker. Im assuming I need a new clock? Oven and broiler wont work.
1 Answer Hello Doug. Check and make sure you have 240 volts coming to the range. If the correct voltage is there, make sure there is no burnt wires. If all is good, then the clock may be your problem. Hope this helps. Read More...
Guy March 08, 2011 When did JOHN post his question? I have the same issue with my oven GLEFS77CQB. Our oven tripped the breaker and we heard a distinct "pop" from the oven. At first I thought it was the element. When removed, it tested within range for continuity. I am thinking the control unit is out also as I get no voltage on the L2 output when the oven or broiler are turned on. Any help is appreciated.
1 Answer Hello Guy. If you have no voltage you will need to replace the clock. You will also need to order an overlay for the new clock. 316220804 Hope this helps. Read More...
John February 22, 2011 Is this the eoc for the oven? I hane no bake or broil on my oven but everything else works. I have tested all components of oven and i only have 120 volts going to my elements in the oven. Elements both ohmed out correctly and i found that the L2 out connection on the eoc is not putting out any voltage. It is the orange wire that connects to the oven and broiler elements opposite of the bake or broil terminals on the eoc. Any advice? The oven was left on by accident overnight and hasnt worked since.
1 Answer Yes it is. You will need to order the overlay as well. Here is your part numer.316220805 Read More...