Bob May 22, 2011 for Model Number 790 95423301 The oven went into a lock door mode while using then after numerous attempts to unlock and shut off oven we were able to unlock the door. Then by pressing different combinations of the buttons we were able to shut the oven off. Now although the timer works and the temp settings work the oven will not come on. The stovetop burners work fine.
1 Answer Hello Bob! Are both the bake and broil functions not working? If so, make sure that the you are getting the proper 240v to the unit and the clock 316207511 is sending the voltage to the terminals. If the clock is not sending the voltage, it will need to be replaced. If only the bake is not working and it is getting the voltage, the bake element 316202200 will need to be replaced. You can test these with a multimeter MA-DM1. Here is a link from our free repair forum you can refer to for help with using a multi meter. Hope this helps, thaks! http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Jim April 23, 2011 for Model Number Kenmore Electric Range mode # 790 You might have heard this before. Popping sound, non stop beeping, F1 display. Took EOC panel out and found blackened area on EOC. From all blogs I've read pretty common problem. Your part above will replace this correct.? Why is about $60 bucks cheaper?
1 Answer Hello Jim. If you can provide your full model number, we will be glad to make sure this is the correct EOC for your unit. Thanks. Read More...
Dan April 19, 2011 for Model Number fef366cqb When we turn on the oven or broil, they both go out. What could it be?
1 Answer Hi Dan. You will want to test part number 316233903 with a multi meter MA-DM1, it should read around 1100 ohms at room temperature. If it fails, replace part, you might have a defective clock timer 316207511. Hope this helps! Read More...