Larry Rowe December 06, 2017 for Model Number 790.99124401 My Kenmore Elite range was purchased in 2004. The oven stopped working. The cooktop works fine. I purchased the kit (part number 5304455004) which included all three control boards from Sears Parts Direct. After installation, the oven worked, but the range top didn’t. We had Sears repairman out and he said the new parts must have been bad, but he couldn’t check the boards to tell for sure. He recommended buying a new kit and said if it didn’t work, we should consider replacing the range. We returned it and re-ordered from Sears. The 2nd kit again fixed the oven, but the cooktop won’t work. Both replacement kits were from Electrolux. We’ve read online that the new control boards have revised software, so all three boards are necessary to be compatible. Are there parts still available with the software from 2004, maybe from another manufacturer, that will work in my stove? The range has been excellent, and still looks new; I would like the stove repaired but am 100% fed up with Sears advise. Can you help me out?
1 Answer Larry, Based on your model number we are not showing that this kit is not for your unit. With this part not being for the unit the correct control board that would be needed would be 316418750 for the issue of the oven not working. Read More...
Tom May 04, 2015 for Model Number 79099129405 I bought a clock timer board my old one was burnt bad (I had nothing, no power any were). Ok ordered a new one order number 5418321. installed and plugged in the stove had PF across the board. I touched the off button on one burner and all but the main PF (next to the timer ) went off. None off the touch buttons work all you see is the time and PF I hit clear stop nothing. Am I up a creek without a paddle.
1 Answer Tom, You will want to check the ribbon harness that goes from the membrane switch to the control board and make sure that they have a good firm connection. Check to make sure that that is no corrosion on the connections. If this checks ok then it sounds like the issue would be that the membrane switch has also failed. Read More...
F.G. January 08, 2015 for Model Number Kenmore elite electric range model # 790.99124401 The broiler and oven stopped working. My appliance service man checked the range and determined the oven control part #316418750 was bad. I ordered the part and installed it and the broiler and oven worked again. Then the cook top elements stopped working and it put a F5 code up. What is the problem?
1 Answer Hello F.G., The fault code F5 on this model Shows up as an electronic oven control failure (also called EOC or clock). You should check all connections for proper placement and good electrical connections. If no problems are found, the replacement part you received was defective from the manufacturer. You should be aware that the surface issue is on a different circuit that is not shared with the bake compartment. This is possibly the fault of the surface unit control board 316272401. Read More...
Mr September 03, 2014 for Model Number Range # C970698230 - Part # 316418750 Is this replacement part a new or reconditioned one?
John C. July 11, 2014 for Model Number 790.99129405 stove I press the tab for bake and the broiler comes on. plus I get the F10 error. would the electronic oven control be bad. I was told the part number was 316418750. Model # 790.99129405 stove. don't want to spend big bucks. 250,00 is the price. if it doesn't solve the problem can I returen the part??? John Collins Thanks.
1 Answer John, Based on the information, the F10 on this unit would be a oven sensor error in which you will want to check the sensor for 1090 ohms at room temp. If it is in range of 10% then it is good and the control board would need to be replaced. The control board is part number 316418750. Read More...
Scott November 06, 2012 for Model Number 79099129403 How do I check to see if my clock is bad,I am losing 120 v somewhere
1 Answer Hello Scott, Go to bake terminal on the clock and test for 120 vac to ground with the oven turned on. If you do not have 120 vac then you need new clock 316418750. Read More...