Gary December 27, 2012 for Model Number FES367DCB The clock timer (part # AP3561387) is blank. The stove top works but that's it. I've turned the breaker off then back on but still nothing. Is there a reset button ? if not, what could this be?
1 Answer Hello Gary, You can check to make sure that there is power getting to the control board. Check from L1 to neutral on clock assembly 318185447 and see if you are getting 120vac. If there is power there then you would want to replace the clock. Read More...
Bob B. September 30, 2012 for Model Number FES367DCC I have an F-1 continually flashing on the display with a beeping. I have tried to reset it but it continues to do this. I have been told I need to replace part number 318185447. Do you agree with this or is there a cheaper and easier thing to try? Thanks.
1 Answer Hello Bob, Since the F-1 fault code is the code for a failed control, I would have to agree that the clock assembly 318185447 is in need of replacement. Read More...
Richard S. April 11, 2012 for Model Number FEB 24S5ABB When I turn on the Oven it doesn't heat up in bake or broil. Every thing else works. I've tried to use cleaning mod door locks but, it too doesn't heat up. Both 30 amp fuses in my circuit box are good I check them with a volt meter. Any help would be appreciated. Thank You Richard S.
1 Answer Hello Richard. If the unit has 240 volts at the terminal block, and none of the wires are burnt, and the elements are good, but do not work, you will need to replace the clock 318185447 in the unit. Hope this helps. Read More...
Carolyn February 12, 2012 for Model Number feb24s5abb I need the black casing that surrounds the clock # ap3561387. Would this be available?
1 Answer Carolyn, the black face plate is not available separate from the clock 318185447. The control panel 318234103 however, can be ordered separately. Thanks! Read More...
B Little May 10, 2011 for Model Number SEB24S5ABB Frigidare 24" Oven I keep getting an DR message when I turn the stove on. In the service manual that has to do something with the Door Lock function, but the door lock motor doesn't turn. (I've checked the door lock motor and it works okay, along with the micro switch that it triggers.) Any ideas???
1 Answer Hello B Little. The model number you provided is not working. Can you check and make sure the model number is correct? Thanks. Read More...