Zachary August 05, 2017 for Model Number AEQ6000ES2 I need to replace the electronic control board on my Affinity AEQ6000ES2. Original part 134599900. I can't find that part. What others are compatible? Thanks.
1 Answer Hello Zachary. You will need to order 134557201NH for the control board needed for your model. Read More...
Vu H. January 12, 2017 for Model Number FAQE7073KA0 I got this dryer and it wasn't heating when running. I bought the heating element from you guys earlier and installed it, seems to gives out heat now, however I still got the spinning digital dial at time LED window. I tried running it with Timed Dry option 1st, it went from 15 minutes to 7 minutes fine, no spinning digital dial at LED window, but when tried with Heavy load option with High heat, it went from 55 minutes down to about 50 minutes then it starts the spinning LED digital dial, circling continuously, like it's not able to keep up with the timer or something. Which likely, will cause it to run constantly for hours without stopping like it did before replacing the heating element. Thanks
1 Answer Hello Vu, This sounds like there is a ducting issue in the home ducting. You should make sure is is not too long and/or complicated and that it is not crimped, clogged, or otherwise restricted since this will cause both long dry times and will trap heat in the units' cabinet, causing what appears to be heating issues when no heating issues actually exist. Read More...
B September 23, 2016 for Model Number Frigidaire Dryer Model FAQE7073KW0 The dryer will turn on when shut the door with no control buttons hit or no lights on control display. Drum running- hit cancel button keeps running. Control panel need replaced? Thank you
Christina November 28, 2013 I need a new control panel for my Frigidaire dryer. It is affinity. I get an error code 68. Where do I find the part number?
1 Answer Hello Christina, The part number will be in the parts list for the model number for your unit. The model number will be on the units' I.D. tag usually inside the door of the unit. You can re-post with the model number or you can call us with the model number at 1-877-477-7278 and one of our representatives can look it up for you. Read More...
Jw October 22, 2013 for Model Number AEQ6000ES2 I need to replace the control board on my Affinity AEQ6000ES2; original p/n says AP3886716, but AP64452818 and AP4454714 appear to be the same control...can I upgrade to one of these? Two reasons I ask, the weblink to the original board isn't working, and I don't want to have the same problem with the same board later...thoughts?
Kaydee T. May 22, 2011 for Model Number BAFW3574KW0 I found the number on the washer - it was exactly the same with the addition of a zero or the letter O at the end - BAFW3574KW0 Can you send me the service manual? Thanks for your help - I really appreciate it!!
1 Answer Hello Kaydee. We can not locate the manual for the model number you provided. Frigidaire does not show the model number you are providing. Sorry. Read More...
Kaydee T. May 17, 2011 for Model Number BAFW3574KW I have copied the model number from the kiosk display information that came with my washer -Frigidaire - Affinity 3.5 Cu. Ft. 7-Cycle Washer - White. Model BAFW3574KW / SKU 9377541. We purchased it from Best Buy.
1 Answer Hello Kaydee. The model is not working. Here is a link of where to look on the washer and see if the model is correct. Hope this helps. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Kaydee T. May 14, 2011 for Model Number BAFW3574KW You offered to send me the service manual for my Frigidaire Affinity 3.5 Cu. Ft. 7-Cycle Washer - Model BAFW3574KW.
1 Answer Hello Kaydee. The model number you provided is not working. We will need your correct model number to find the service manual for your washer. Thanks. Read More...
Kaydee T. May 12, 2011 for Model Number Frigidaire - Affinity washer - BAFW3574KW My washer is 1.5 years old and already needs a new control board - the warranty was for one year. The repairman wants to charge me $340 to repair it and I can buy a whole new washer for $370. I found the part (Part Number: AP4454714, Manufacturer's Number: 137070860) online - my question is: How do I install the new control board on this model of washer?
1 Answer Hello Kaydee. If you will supply your email address, we can send you the service manual for this washer. Hope this helps. Read More...