L July 19, 2012 for Model Number GLEB27S7ABA FRIGRIDAIRE This is a follow up on the testing of the oven element with the ohm meter. The meter is on 20 k, when testing the element and it reads .02 or .03 when testied. The ohm meter is 0-ed out before the test. Does this meter seting help you idientify ??? Thanks and it sounds like i need the element. correct?/ Thanks again, Leroy
1 Answer Hello L. Set it on 2k and do a reading. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Leroy July 19, 2012 for Model Number GLEB27S7ABA FRIGRIDAIRE It will not heat over 200 degrees. Question 1, When I test the oven element with the ohm meter, it is 0-out and when tested it is .02 to .03 on ohm test, Is this good or bad? What is a bad element ohm test reading? Question 2, When I the switch with the ohms meter, , it shows no drop and is on .00 when tested.??
1 Answer Hello Leroy. It depends on the setting of the meter, but if there is no resistance, it sounds like the element 318255100 is bad and will need to be replaced. Read More...