Ed February 27, 2014 for Model Number BGGF3042KF JUST HAD MY BGGF3042KF RANGE DELIVERED DO YOU CARRY A LP CONVERSION KIT FOR IT ? THANK YOU FOR YOUR HELP
George February 25, 2014 for Model Number FFGF3017LB I am buying a fridgidaire model FFGF3017LB from best buy and I have propane at home, what item will i need to convert it over thank you
Bill February 20, 2014 for Model Number TGF657BFB6 Looking for a conversion kit for a Tappan Range Model# TGF657BFB6. To convert from natural gas to LP. Is there a kit available for this range? Thank you
1 Answer Hello Bill. This model is convertible. You adjust the orifices and flip the regulator to convert the unit. 1. Lift cooktop to gain access to the surface burner spuds. 2. With ½" wrench, turn spud down or clockwise until snug (approximately 2 ½ turns). This restricts the flow of gas through spud to that allowed only by the hollow LP metering pin. Do not overtighten. 3. Lower main top and apply gas to check for proper flame size. Flame should be steady with approximately ½" blue inner cones and no yellow or orange tips. Proper Air Adjustment If air shutter is adjusted so that too much air flows into the burner, the flame will appear unsteady, possibly not burning all the way around and will be noisy (like a blow torch). Do Not Remove the Pressure Regulator Remove cap-screw and snap out the nylon gas indicator by pushing it sideways. Turn the nylon gas indicator for type gas (Natural or LP) and snap it back in the cap-screw. Put cap-screw back on gas regulator. Read More...
Gregg February 15, 2014 for Model Number GLGFZ376FCB I have a Frigidaire Gallery Series Range that was converted to LP and now I need to go back to Natural Gas... can't find the old orifices. What parts do I need to do this? Is there a kit? Thank you.
1 Answer Gregg, the manufacturer does not offer a kit. You'll need two 9.5k burner orifices part number 316237902, one 5k burner orifice part number 316237903, and one 14k burner orifice part number 316237900. Thanks! Read More...
Brad February 07, 2014 for Model Number FGF379WECN This is a follow up to this question below. a technician told us this model required some type of sleeve that is not included. 1. What sleeve is he talking about. and is this valid? and is there any options for this? thanks Hello, I am trying to convert my stove from Natural Gas to LP . I can't seem to locate the conversion kit. Are there any other options? Or other kits that would work on this model? Thanks. Bdams for Model Number FGF379WECN ANSWER Hello! You can use LP conversion kit GRLP3 on your model FGF379WECN. Thanks!
1 Answer Hey Brad. I can't confirm that this Lp kit will work for you. The correct kit for your model is part [5303307190], and is No Longer Available. Read More...
Phil G February 03, 2014 for Model Number Tappan MPF303PGWF Need conversion kit to change from NAT to LP gas. Do you have such a kit, or can you provide individual orfices to do this? Thanks,
1 Answer Hello Phil. This unit is convertible and does not offer a kit. You flip the regulator and adjust the orifices for LP to convert it. Read More...
Manuel February 02, 2014 for Model Number FGF355AUD I'm trying to convert my stove from propane to L.P. What kind of kit do I need?
Bdams January 31, 2014 for Model Number FGF379WECN Hello, I am trying to convert my stove from Natural Gas to LP . I can't seem to locate the conversion kit. Are there any other options? Or other kits that would work on this model? Thanks.
Ed F January 29, 2014 for Model Number FGFL67DCL Frigidaire I need to convert from Propane to Natural Gas. The person I got the stove from said all they did was change the gas line connector? I hooked up to my natural gas and the big burner is the only one that lights and it doesnt run properly..Is there an orifice kit to make this change? I am having a little difficulty deciphering the numbers...
1 Answer Ed, To convert the unit back to natural gas you will need the following parts, the top burner orifices 3 of part number 316237902 and 1 of part number 316237900 for right front orifice. For the oven orifices you would need to loosen 1 1/2 to 2 turns and close the air shutter until only about 1/4 way open. Then flip the regulator from LP to Natural. Read More...
Steven January 16, 2014 for Model Number Frigidaire FGF366DCA I am looking to convert my daughter's Frigidaire model FGF366DCA from LP back to natural gas. Please advise as to what parts are needed for burners and oven. The person that we purchased it from said he only changed the main orifice on the gas input line when he converted from NG to propane. Thanks. Steven O.
1 Answer Hello Steven, You need 3 316237902 and 1 316237900. You can adjust oven and flip regulator. Read More...