Luigi June 20, 2024 for Model Number CPE3085KF6 I have replaced my bridge burner with an official Frigidaire part. The front burner still not working . What would be the cause of this.
1 Answer Hello Luigi, thank you for contacting APP, I was unable to find CPE3085KF6, but I was able to find CPES3085KF6. If only the Left Front Burner is not working, and the Bridge Burner Element has been replaced, this issue could be related to the Surface Element Board 318411401 not telling it to come on, or the Relay Board 316442119. Read More...
Stephen April 01, 2024 for Model Number 79046613502 Looking for a burner control switch for this model.79046613502 It is the left side with the bridge burner. It has a touch control panel. No knobs.
1 Answer Stephen, We list the part as NLA. Try a google search with part number 318335856 to see if anyone still has existing stock. Read More...
Bm March 29, 2021 for Model Number 318177900 Is there a cross over diagram for the new model burner from Fridgedaire
1 Answer BM, We will need your model number to help you find the right parts for your unit. Please post another question with all your info included thank you. Read More...
Michael June 13, 2020 for Model Number CPES389DC2 Serial #NF34517440. The rear left element is burnt out, the front left with the extension still working. Which part # is to be ordered, dual or single? Looks like model with DC2 is discontinued. Please advise.
1 Answer Michael, The surface element assembly for the left side is part number 318258201 Read More...
Kevin September 12, 2018 for Model Number PLES389CCB I purchased the replacement bridge element OEM Part #318258201 for my Frigidaire PLE389CCB stove. Took stove top apart and when I went to install new element found that all the wiring connections had been reconfigured. Tried to match up old 1a, 1b, 2a, etc.wires to new connections but front knob ends up turning on back burner and vice versa and bridge element doesn't turn on. Is there any info available regarding making the right connections to the new configuration? Thank you for your assistance.
1 Answer Kevin, Unfortunately there is no video or instructions for installing this element. It sounds like you wired it properly but may have it turned around the wrong way and it sounds like you may not have connected the wire to the bridge burner. The connectors should be facing toward the center of the cooktop. Also make sure that you are connecting the correct wires to the correct element. Read More...
Louise D. May 14, 2017 for Model Number Frigidaire/Electrolux GLEC36S8CBA The front left (single or oval burner) does not work, however the back left burner does. Do I need to replace the back burner as it looks to come in one part or is there just a part for the front left and middle part of the oval burner? Also, does this require an electrician to fix or can someone who is handy do it easily? Thanks
1 Answer Hello Louise, This design has to have both front and rear on the left element replaced at the same time as they are made as an assembly 318258201 if the control 318191000 is not the issue. The part can be replaced by anyone competent but I would recommend an appliance repairman before even considering an electrician since electricians are not trained in appliance disassembly or reassembly. Read More...
Dorothy April 21, 2017 for Model Number fes365ecb Left front surface burner does not work also right front does not ignite before turning on the right back burner first. What parts are needed to repair them..
1 Answer Dorothy, For the right front burner not working unless the right rear is turned on then this sounds like it would either be in the wiring or a bad switch. You will want to check the switch for the left front and check the element to make sure it is not burnt. Read More...
Gloria July 08, 2014 The front left burner of my Frigidere cooktop does not heat up, but the bridge and back burner are working. Does part #318178200 include the bridge, which I don't seem to need?
1 Answer Hello Gloria! The manufacturer doesn't sell the burner separate from the burner assembly 318258201. Thanks! Read More...
Jim July 23, 2013 for Model Number Model Number PLES389DCB Do you have installation instructions for part #AP3778544?
1 Answer Hello Jim. Remove burner box from slide in range. Unscrew the burner box from all sides. Remove the burner box from the glass top. Remove • the retainer bar by applying pressure to the extremity and pulling the anchorage away from the retainer bar in order to free the surface element. Read More...
Jim July 22, 2013 for Model Number PLES389DCB Regarding part #PS978790 surface element: only the front part of the element is not heating. Does that mean it may be a bad switch, or does the entire element assembly need to be replaced?
1 Answer Hello Jim. If there is power to the rear, but it does not work, replace the element. If there is no power to the rear, replace the switch. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...