Michelle March 02, 2016 for Model Number FRS3HR5JW3 Ice maker recently froze up. Took it completely out and let it thaw, then allowed over 72 hours for it to work again. It dumped ice but never really caught up after the time was up. Now we don't hear the ticking of the timer. You can knock gently on the front where the cubes are made (past the swinging door) and hear the timer again. But it doesn't last and turns back off again without dumping ice. Water dispenser works fine and nothing is frozen anymore. Any thoughts?
1 Answer Hello Michelle. It sounds like the icemaker is bad and will need to be replaced on the unit. Read More...
1 Answer Hello Desi. If there is power to the water valve and no water, replace the valve. Also, make sure the filter is good on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Angie June 02, 2014 for Model Number FRS26KF6EMB Our Frigidaire just last night stopped dispensing ice when either cubed or crushed buttons were pushed. It stopped midway when I was getting ice. We took the ice bucket out and dumped it, put it back in, still no luck. Mind you, the ice bucket was quite full when we dumped it. There is no sounds like it normally makes either when it dispenses ice. The ice maker itself is still making ice and the water is working perfectly. What could this be? Should I test something to see if it could be the switch?
1 Answer Angie, It sounds like the auger motor may have gone bad but what you will want to do is access the auger motor and with the light switch pushed in and hitting the dispenser lever while on cubed check for 120 vac at the motor if there is 120 vac then the motor is faulty and would need to be replaced. Read More...
James R. March 27, 2014 for Model Number FRS6HR35KW0 I have a Frigidaire side-by-side refrigerator that is no longer dispensing water through the water dispenser. I noticed the issue recently when I went to get a glass of water from the dispenser. The ice dispenser works just fine and is still dispensing ice (crushed or cubed). As a matter of fact the refrigerator is still making ice and water is still running to the ice maker in order to make ice. I've looked at several online forums and to the best of my ability I don't see any frozen spots in my water tube. Also, when I take the filter (located inside the refrigerator at the top right corner) out and I press the water dispenser water dispenses inside the refrigerator, however when I put the filter back on, I can hear the dispenser working but water doesn't come through the dispenser door. When the issue of no water coming out the dispenser came up, I replaced it with a new filter thinking that was the issue. The filter used is Pure Source RG-100 WF1CB.
1 Answer James, You will want to remove the kickplate of the unit and disconnect the water line at the bottom of the door. With the water line disconnected, you will push the dispenser lever for water. If water comes out of the tube on the refrigerator cabinet side then the water tube in the door is frozen and will need to be thawed or replace the door due to a void in the door which is allowing the tube to freeze. Read More...
Stephanie March 19, 2014 for Model Number FRS6R5ESBL Our fridge makes ice and drops it into the ice bucket just fine. However, it will not dispense out of the door. The water in the door also works. There is no noise of a motor trying to work. Wondering if this sounds like the motor or the dispenser switch. Thanks!
1 Answer Stephanie, You will need to access the auger motor and test for 120 vac going to the motor. To do this the light switch must be depressed and push the dispenser lever. If there is 120 vac present then you would want to replace the auger motor. Read More...
Pete January 28, 2014 for Model Number frs26hf7bb0 My ice dispenser will only drop ice if I take a cup and push button and ice selector button at same time. would it be AP3965563.????
1 Answer Pete, Yes, This issue sounds like the contacts inside the switch are messed up and not allowing the selection without pushing the button at the same time. You would want to replace the switch 5304525097. Read More...
Andrew October 20, 2013 for Model Number frs6lr5es6 When I press in on the ice and water it sounds like they have been switched. When I press in the water dispenser it sounds like its calling for ice. When I push the ice dispenser it does nothing at all. The machine makes ice just fine though and I have already replaced the water valve. Im almost thinking it may be a defrost control board but Im lost at this point. Im not getting anything coming out of ice or water and its too expensive ofa fridge to just replace. any help is greaty appreciated
1 Answer Andrew, This issue would not be caused by a faulty defrost control board but would most likely be the dispenser switch 5304525097. Read More...
Pat April 21, 2013 for Model Number frshb5ehpw1 Hi, my ice/water works fine, my ice maker makes ice, but it doesn't dispense ice. Do my actuator needs placing as does my ice chute. Do you think this could be the problem or do you think I may need a new switch or motor.
1 Answer Pat, You will want to test to see if you are getting power to the auger motor. If the motor is not turning and you are getting 120 vac to the motor then the motor is bad and would need to be replaced. Read More...
Serge December 17, 2012 for Model Number FRS3HR5JW2 The water dispenser in our regrigerator stopped working. However, the ice dispenser is still functional. In your experience, what could be the possible causes of this problem and what parts would I need to replace?
1 Answer Hello Serge, You would want to test your water valve to make sure that you are getting voltage to the valve when dispenser is pressed. If you do not have 120vac at the valve then you would want to check to make sure that the dispenser lever is making contact with the switch. If the lever is not depressing switch then there is a problem with the lever. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Cindy March 10, 2012 for Model Number FRS26R4CB5 My ice dispenses only cubed ice even if the crushed ice button is pressed. Will this part (AP3965563) correct the problem?
1 Answer Hi Cindy. Before you change the switch cluster part # 5304525097, try this first... Remove the ice bin. Dump the ice and look at the auger itself and see if there is a cube stuck jamming the crusher blades in the head of the ice bin. Make sure the bin auger moves loosely in both directions. Then open the door and tape the door switch shut. With the door open, toggle the glass actuator pad and call for both cubes and crush. See if the auger motor part # 242221501 turns both ways. Is the auger drive bar part # 241726501 still tight on the auger motor shaft? When the auger reverses direction while you ask for crush, does the crush solenoid Part # 241675704 (beside the auger motor) forcefully lift up and is able to work the ice bin lever (front to back) and operate the auger crusher teeth open and closed? Thank You. Read More...