Guest March 18, 2011 I can only access the bolt from the bottom. All I see is the bottom of the bolt. I can't get to the top of the bolt.
1 Answer Hello. You should see the bolt head at the top of the coupling, unless the head of the bolt has broken off. Try pulling upward on the coupling and see if it pulls off. Thanks. Read More...
Guest March 18, 2011 How do I get the agitator coupling off? I've tried a few different ways with no luck. Thanks for your help!
1 Answer Hello. There is a bolt in the top of the coupling. If you remove this bolt, the coupler will pull off. Hope this helps. Read More...
Guest March 17, 2011 for Model Number Wcsr4110t8aa Our agitator came off while doing a big load, I put it back on by pressing it down but it will not stay on during wash cycle. It keeps coming off. Is there a screw or something missing?
1 Answer Hello. You may have a bad coupling. WH49X10042 Check the agitator and make sure it is not stripped out. Hope this helps. Read More...
1 Answer Hello. You will need to lift upward on the agitator to remove it. These can be tight due to the coupling under the agitator. Hope this helps. Read More...
1 Answer These can be tight, but they pull upward to come off the coupler. You will need to pull from the bottom of the agitator to remove it. Read More...
1 Answer The dispenser will pull off the agitator. However the agitator does not separate. Read More...