Amy October 10, 2018 for Model Number JBP66woB4WW what model # do i buy for a GE Spectra stove I need a bottom heating element for stove
Aaron August 29, 2018 for Model Number JBP79W0B1WW Bottom heating element is broke in my GE oven. What part do I need to order for correct fit? Serial # off oven is DV113573Q.
Kelly June 11, 2018 for Model Number J bp78a y1aa What part number fits my ge oven bake element? Thanks. This is the correct email address.
John Sucharski October 31, 2017 for Model Number JBP48WA1WW Does the bake element WB44X10013 fit my oven model?
1 Answer John, The WB44X10013 / WB44X10013 RANGE BAKE ELEMENT is the correct part to order for the model number you supplied. The part is in stock and available at this time. Thanks, Read More...
Jill October 01, 2015 for Model Number MODEL_jbp66wok1ww Serial number VH2452340 GE oven bake element You show 2 that look alike How do I know which one to order?
Scott January 02, 2015 for Model Number j BP78a Y1AA I need the baking element that connects with two screws; not push on like shown on your video. Is WB44X10013 the right part number?
1 Answer Hello Scott, Part WB44X10013 attaches to the wiring harness with two screws. It is also the one listed by the manufacturer for the model number JBP78AY1. Read More...
Tommy H. February 13, 2014 for Model Number JBP78WY1 The baking element comes on after waiting 20-30 minutes. I tested the bake element with a multimeter. I believe a reading over 50 indicates the element is bad. My reading was 16.2. Should I replace the element or should I suspect there is something else wrong? Also, the wires are not slip on; they have a plate with screw holes. Is that a problem with a new element? Thanks
1 Answer Hello Tommy, The element sounds good. You need to trip the breaker off and back on, then re-try the unit. If one side of the breaker is tripped it will only have 120Vac to the element and will produce your issue. If this doesn't get you going, you will need to test the temperature sensor. It should read about 1100 ohms at about 70°F. If it reads good both at the sensor and the connection point to the control, replace the control WB27X10311. Read More...
George January 19, 2014 When removing the baking element from the bottom of the oven, the spade end of the element broke off in the connector to the oven and I cannot remove the spade end from the connector end of the harness? Any suggestions on what to do?
1 Answer Hello George, If you cannot remove it using two pairs of pliers, (one pair needle nosed), using one as a leverage point against the other, you can cut off the spade terminal and crimp on a new one TJMA02875-1. Read More...
Wendy November 11, 2013 for Model Number JBP78WY1WW Is WB44X10013 the right bake element for our oven, model number JBP78WY1WW?
1 Answer Hello Wendy! Yes, the oven bake element WB44X10013 is the correct part listed for your model JBP78WY1WW. Thanks! Read More...