James G December 28, 2015 for Model Number GE MODEL JGBS21HEH1WW I recently purchased this GE model gas range/oven used. The oven igniter did not come on so I purchase one from Appliance Parts Pros. Upon installing it, when I connected the wiring, the igniter immediately came on as well as the gas burners (even though the oven knob was off). Since then, the igniter and burners come on by themselves at unpredictable times, and go off by themselves shortly thereafter. Do I replace the control board or the thermostat?
1 Answer James, The cause for the oven to turn on by itself would be a faulty oven thermostat which is part number WB20K8. Read More...
D.R. December 27, 2015 for Model Number 362.7526190 The top range burners all work fine but the oven does not start. I am sure the problem is not the oven ignitor itself so I was wondering if there is a fuse or switch or something 'upstream' that controls the ignitor. I'm thinking the issue might be in the Oven Control Board but this is oven is pretty basic so I thought I'd ask before I take things apart. Thanks.
1 Answer Hello D.R., If the ignitor WB2X9154 is not glowing yellow to white hot, it will need to be replaced. Orange or red is not hot enough to open the gas valve. If it is hot enough by color of the glow, the issue will most likely be the safety valve WB19K13. Read More...
Rj September 16, 2015 for Model Number RB536BC2WH I was wondering when I order a new oven control board does it come with the new black sticky overlay with it. I am in need of the black piece that has the clock label on it etc.
1 Answer RJ, The clock does not come with the overlay and the part number for the overlay is WB11K10018. Unfortunately the overlay is discontinued by the manufacturer with no suitable replacement. Read More...
Frank January 27, 2015 for Model Number c968-68863-1 the lower oven element in my range burned off and shorted against the metal cover in oven .I replaced element but it don"t work can"t get 220v across element . There is 220 v coming in to range . The element does work when hooked to 220v.by changing element wire on selector switch from bake setting to convection bake what could be the problem ?
1 Answer Frank, The model number you supplied is incomplete or incorrect. But, chances are that when the element shorted to the chassis, it caused the contacts in the relay board or control to short as well, so you don't have voltage to the new bake element. Read More...
Stan July 18, 2014 for Model Number JGBS23WEA1WW Oven doesn't turn off after being turned on. Shut off gas and igniter was still glowing. Unplugged stove. How do you check if it is the control board or thermostat?
1 Answer Hello Stan. If you press stop, and the oven continues, it is the board WB27T10469, not the thermostat. You will also need the overlay WB27K10003. Read More...
Barney July 10, 2014 for Model Number JGBC20WEW2WW I need to replace the WB27T10469 clock on my GE stove. Under what circumstances would I also have to replace the overlay?
1 Answer Hello Barney. If there was damage to the ribbon cable or the buttons did not work. Read More...
Rick C April 05, 2014 for Model Number JGBS20WEH1WW The oven comes on by its self with the oven controll knob in the off position at random, in the middle of the night or day with no one near the stove. I put a new oven ignitor in it June of 2012, and the stove is approximately ten years old. Before I start changing parts randomely I would like to know if the cause is the oven control board or is it the oven thermostat control? Can someone please give me some advice? Thank You Rick C
1 Answer Rick, The oven control for your unit is done through the thermostat and you will want to check the wiring just to make sure that there are no shorted wires. If not then the issue would be the thermostat WB20K8 that needs to be replaced. Read More...
Mimmo December 20, 2013 for Model Number 36274222302 Kenmore With the oven knob in the OFF POSITION the oven turns on for a few minutes then it shuts off by itself. This happens randomly during the day or night. I suspect a defective control board. Am I on the right track? Thanks for your help.
1 Answer Mimmo, Sorry, but no you're not on track. The "control board" or clock WB27T10469 is a clock only. It has no function or control of the oven burner. Your issue with the oven turning itself on for a few minutes when the knob is in the "OFF" position would involve the oven thermostat WB20K8 There would be an issue in the electrical contacts in the thermostat and it will need to be replaced. Read More...
Michelle July 11, 2013 for Model Number JGBS80BEL1BB We have a problem with lighting our oven. It wont lite , but the burners on top are fine and are working. Would like to replace the part that is causing the oven to not work. What part would that be?
1 Answer Hello Michelle. Test for 3.2-3.6 volts AC at the gas safety valve with the igniter turned on. If the voltage is there, you have a bad safety valve. If the voltage is low, you have a weak igniter and the igniter will need to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Doug June 24, 2013 for Model Number Kenmore C968-68813-1 I have kenmore electric stove Model c968-68813-1. When I type in model number every site says it can't be found. I waslooking for prices for clock/timer bork model aa0022. I called Sears they said stove model discontinued but gave me a number for the clock/timer WB19M300. I am looking for prices for the clock/timer