Customer Questions and Answers for Conversion Kit Asm by Ge

Quest, The conversion kit for your model is: Conversion Kit Asm WB28K10562 / AP4368234 unfortunately, The manufacturer has discontinued this part & is no longer available. The manufacturer has recommended no alternate or substitute part.

Melii, The conversion kit for your model is: Conversion Kit Asm WB28K10562 / AP4368234 unfortunately, The manufacturer has discontinued this part & is no longer available. The manufacturer has recommended no alternate or substitute part.

Hello Penny, the LP Conversion parts were only listed in the LP Conversion kit, which the manufacturer has discontinued and is no longer available.

Alex, The right rear orifice will be part number [WBK10031], left rear [WB28K10215], right front [WB28K10839], left front [WB28K10288]. We do not have a part number for the longer orifice, the screw and the round piece.

Roy, The part numbers that you will need for the Right front burner will be WB28K10839, right rear WB28K10031, center WB28K10288, left rear WB28K10215 and left front WB28K10214. For the oven you would need to tighten the orifices 1 1/2 to 2 turns and open the air shutter all the way.

Alexander, I can send you a conversion kit for LP instructions and you can just reverse the procedure. There are not kits for natural since they come ready for natural gas.

Shawn, Based on the model number provided yes they do and it is part# WB28K10562

Hello Mike, the right front spud is part number WB28K10280, left front WB28K10282, left rear WB28K10283, right rear WB28K10284 and the middle spud is part number WB28K10287. Thanks!

Chris, you will need the orifice holders as the NG orifices are not listed separately. The left front is part number WB28X20607, left rear WB28X21953, center WB28X21513, right rear WB28X21954, and right front WB28K10812. The oven burner orifice hood will need to be loosened 2 1/2 turns, the oven burner air shutters will need to be adjusted, and the regulator cap will need to be set to NG.

Hello Tammy, There is only a conversion kit made to convert from natural to LP since all units come from the manufacturer set up for natural gas. The manufacturer expects the customer to retain the natural parts in case of a future conversion back to natural. If it needs to be converted back to natural and the parts have not been retained, the following parts will have to be purchased for the conversion: WB28K10390 for the right rear, WB28K10389 for the left rear, WB28K10388 for the left front, WB28K10424 for the right front, and WB28K10867 for the center.