Customer Questions and Answers for Range Lp Conversion Kit by Ge

Deb, At this time, we are unable to obtain this part as the burner valves and orifices have been discontinued by the manufacturer & is no longer available. No alternate or substitute part has been recommended by the manufacturer. We are sorry for any inconvenience.

Ken, unfortunately, the manufacturer is not showing the LP kit for this model. However, the LP orifices are as follows: left front WB28T10017, left rear WB28T10017, right rear WB28K10288, and right front WB28T10017.

Gary, you will need part number WB28X39135 for converting the range from natural gas to LP

Amanda, unfortunately, the manufacturer has discontinued the conversion kit WB28K10568 and it is no longer available. However, the orifices are available separately. The right rear orifice is part number WB28K10031, left rear is WB28K10215, left front is WB28K10215, and the right front is part number WB28K10256. The oven burners would be tightened until they are just snug (do not overtighten) and the regulator cap will have to be flipped upside down. Conversion would need to be done with the gas supply turned off to the range.

Jan, The number you supplied is not a model number for a Hot Point/Ge gas range. We're going to need the model number in order to assist you with the proper parts needs and conversion process to make the product as safe as possible. You'll need to open the lower storage/broiler drawer, the production plate, with the model and serial number is usually attached to the front frame of the range. Older ranges have the serial tag located on the oven door frame when the oven door is opened. The tag could be under the cooktop, in the center between the burners, if the top can be lifted.

Sarah The orifices are the following part numbers, for the right rear and center WB28K10288, for the right front WB28T10033, for the left front WB28T10017, and for the left rear WB28T10017. We also have instructions on how to convert the pressure regulator in a pdf we will send you in an email.

Cheryl, this unit is compatible with natural gas and propane. To identify if it has been converted to propane, the orifices would need to be inspected. If the cooktop burner orifices have .99mm, .89mm, or .63mm stamped on the top, then they have been converted to propane. If not, then the orifice kit WB28K10556 can be used to convert the unit to propane.

Hello Robert, according to the manufacturer's LP conversion instructions, the bake burner orifice is unscrewed using a 1/2" wrench or socket and replaced with LP bake burner orifice that came in the kit, (same procedure as in replacing the Broiler burner orifice).

DCG, the BTU ratings for the conversion kit WB28T10234 will work for your model.

Paul, The part number for the LP conversion kit that would work for your unit is WB28K10414.