Henrique S March 26, 2018 for Model Number JGBP28SEM5SS Which would be the correct LPG conversion kit for this model of range (4 top burners and oven burner) ? Regards, Henrique
1 Answer Henrique, In order to change the unit to Lp you will need to get the Lp orifices one WB28K10031, 2 of WB28K10023 and 1 of WB28K10032. For the oven you will need to tighten the orifices to snug and open the air shutters all the way. For the regulator you will need to flip the cap on the regulator from Natural to LP. Read More...
Karen B. February 26, 2018 for Model Number JGB660SEJSS I need to convert natural gas to Propane. What do I need?
Monte December 26, 2017 for Model Number jgb660eej1es need to convert back to natural gas, what orifices are required for stove top and oven?
1 Answer Hello Monte, you'll need to order the orifice tubes in order to get the NG orifice. For the left front you'll need WB28X24761, left rear is WB28X24763, center is WB28X24762, right rear is WB28X24764 and the right front is WB28X24766. Thanks! Read More...
Jasper December 24, 2017 for Model Number JGBP40BEC1CT I'm trying to find an LP to Natural Gas (stove is already in LP config) conversion kit.
1 Answer Hello Jasper, you'll need 2 medium orifices part number WB28K10022, one small orifice part number WB28K10029 and one large orifice part number WB28K10034. The oven and pressure regulator are convertible, Thanks! Read More...
Timothy December 12, 2017 for Model Number JGBP87WEK3WW Do the orifice for conversion kits from propane to natural gas have the same numbers.
1 Answer Timothy, To go from LP back to Nautral gas you would need to replace the orifice holder assembly left front WB28K10289, left rear WB28K10291, Right front WB28K10290, Right rear WB28K10293, and the center WB28K10292. Read More...
2 Answers Lyle, The lp orifices for this model number will be for the right rear WB28K10031, 2 of WB28K10023 for the 2 left burners, and for the right front WB28K10032. For the oven you will want to tighten the orifice hoods to snug and open the air shutter and then flip the cap on the regulator from NAT to LP. Read More...
2 Answers Lyle, The LP orifice kit for the model number you supplied is WB28K10556 Conversion Kit, The kit consists of the four top burner orifice hoods, the oven orifice hoods are "adjustable" and the regulator cap is also. Read More...
Aaron September 21, 2017 for Model Number jgbp87sem2ss I need the correct part number for the conversion kit to change from LP to Natural Gas. Thanks
Travis September 21, 2017 for Model Number JGB860SEJSS We purchased and installed the high altitude conversion kit #WB49X25442 but are unable to maintain a flame on broil and bake burners, fluttering wildly and eventually go out altogether. We are at 8000' and suspect we may need an 'ultra-high elevation' kit. Any suggestions? Thanks
1 Answer Hello Travis. Sorry, they do not list an ultra high altitude kit for the model number you provided. The kit you installed is for LP gas. Also, you must convert the regulator for LP gas as well. Thanks. Read More...
David Green September 16, 2017 for Model Number JGBS23DEM3BB CAN I CHANGE THIS STOVE FROM LP TO NATURAL GAS AND IF SO WHAT WILL I NEED TO DO THIS?
1 Answer Hello David, you'll need to order the following parts to covert your unit back to natural gas: right rear orifice holder WB28K10187, left rear orifice holder WB28K10188, right front orifice holder WB28K10189 and left front orifice holder WB28K10190. Hope this helps! Read More...