Customer Questions and Answers for Grille Sub Assembly by Ge

Duncan, This part has been discontinued by the manufacturer & is no longer available. No alternate or substitute part has been recommended by the manufacturer.

Hello Eduardo, the part is listed as the grille sub assy, part number WB07X10475, however the part has been discontinued by the manufacturer and is no longer available.

Tony, on the hinges of the grill assembly there will be a notch for the bottom of the springs to attach to while the top would attach to the plate.

Daniel, On top of the microwave there should be 2 screws that would hold this panel in place.

Joy, The black part of the grill would be part number WB07X10475 or you could get the entire grill part number AP3418725].

Val, At the front top ledge there will be 2 or 3 screws that you will remove that will allow you to pull the air grill off by sliding it to the left and the removing. You will install the new air grill in reverse.

Hello Theresa, The easiest fix is the grille assembly WB07X10451. This is replaced with a Phillips head screwdriver and two screws. For a little less money and a lot more assembly you can order WB36X10189. The parts explosion is the only guide available for this repair.

Hello Luis, Without the model number the best I can do is guess that WB07X10431 would be close to what you need. I cannot guarantee this is correct. If you want a definite answer as to which part number your model will take, please re-post with the model number from the units' I.D. tag.

Rita, There should be a couple of clips at the bottom of the grill that you will slide into openings on the frame of the microwave. Once you have them in the grill should slide to the right and insert the top under the cabinet and install the screws.

Jessica, The part that you will need to replace for the clips being broken on the grill is part number WB07X10446 which is the grill sub assembly.