Bob Z. October 16, 2014 for Model Number TFF20DBC Need lower hinge cams to close the door completely...Right side door...What part number do I buy...GE Model TFF20DBC
1 Answer Hello Bob! It looks like both the upper and lower cam is the same on this unit and that is part number WR2X4901, thanks! Read More...
Marc April 15, 2013 for Model Number Hotpoint csx20e The right door no longer raises when it opens, thus, it no longer closes on its own. Which part makes it raise?
1 Answer Marc, The cam is what allows the door to raise and lower. If one of the cams is bad then it is likely the other on the same side would be bad as well. You would need to get the Lower hinge kit WR13X10020. Read More...
Joe@Healthinsuranceenterprises.Com March 02, 2013 for Model Number tfx24fab frt refrig rt cam disintegrated. Is this a cam only appears riveted to hinge. Is hinge assembly wr49x5124 a two part assembly? Is ther also a shim?
1 Answer Joe, The hinge comes with the cam assembly. It is a 2 part consisting of the hinge with cam riveted to it and with the upper cam. Read More...
Clara August 25, 2011 for Model Number TFX22RGB This hinge assembly looks like the correct one, however, I can't tell if it will accomodate a drain hose to be threaded through it. Also, I had ordered the little black washer (shim cam?)but when I went to install it, the original one was riveted to the hinge. That is the part that I saw break, causing my freezer door not to stay closed, so I thought that this small washer was all that I needed. I'm just wanting to make sure of it fitting and will take care of my problem. Thank you for any help you can give. Clara part#AP2635796
1 Answer Hello Clara. Yes, based on the information you provided, it sounds like you will need to replace the hinge assembly WR49X5124. Hope this helps. Read More...
Jimbeauga June 06, 2011 for Model Number TFX24RMA Does the hinge assembly come with the shim cam? The hinge seems fine; should I just order the cam riser and shim cam?
1 Answer Hello Jimbeauga. No, WR49X5124 does not come with the shim cam WR2X6043. You will need to order it separately. Hope this helps. Read More...