Bob July 13, 2016 for Model Number JGBS23BEA5WH How do I know which orifice goes to which burner? I see some markings on the orifices, but how to match the mark with the burner location/BTU? RF, RR, LF, LR etc.
1 Answer Hello Bob, The conversion kit should have come with instructions which tell how to install the LP orifices in their precise locations. Read More...
Lisa N. April 07, 2016 for Model Number JGBS60DEFWW What High altitude LP conversion kit is compatible with a GE range model JGBS60DEFWW? Thank you
1 Answer Hello Lisa, I was able to locate the orifice sizes for 5000 ft. or more above sea level. They are as follows: Right Front - 0.88mm - Marked L88 Right Rear - 0.61mm - Marked L61 Left Front - 0.83mm - Marked L83 Left Rear - 0.83mm Marked L83 I'm sorry but you would have to contact the manufacturer to get the part number for a kit containing these orifices. Read More...
Tony S March 24, 2016 for Model Number ZGU660ES3BG Need to convert from NG to LP Large burners 11000 Btu Small burners 6000 Btu
1 Answer Tony, The LP conversion kit for this unit WB6K6 but unfortunately has been discontinued by the manufacturer with no suitable replacement available. Read More...
Bob February 02, 2016 for Model Number GE Model JGBS60DEF1BB I need to buy a natural gas-to-propane conversion kit for my stove but don't see my model listed anywhere so I'm having trouble figuring out which conversion kit to buy. Is there some listing somewhere that would tell me which parts I need?
Bob December 16, 2015 for Model Number 392.75588892 Need part #'s for each burner to convert this stove to LP gas. Thanks, Bob
1 Answer Bob, The LP conversion kit for your model will be part number WB28K10045 which is for the main top. For the oven you will tighten down the orifices and open the air shutters on the burner tubes and flip the regulator cap from NAT to LP. Read More...
Jim V. May 22, 2015 for Model Number 362.75206891 I am converting this Kenmore range from LP to Nat. What do I need? Thanks Jim
1 Answer Jim, To convert the unit back to Natural gas you will need the following orifices, Left front and left rear WB28K10022, Right rear WB28K10029, right front WB28K10030, and for the bake you will loosen the orifice on the oven control valve 1 1/2 to 2 turns. Also Flip the cap on the regulator. Read More...
1 Answer Gary, We would need to have the model number for your unit. the XL44 is a model name but not the model number and covers many different units. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Carol June 26, 2014 for Model Number Hotpoint RGB746HED3WH I ordered a conversion kit to convert a natural gas stove to LP. I received the kit today and had the gas company send someone out to install it. While here he told me the kit I received wasn't compatible with my stove and he would order me another kit himself (he is charging $35.00 for the kit). Anyway, I thought this was high so I was going to order another one from you but when I put in the model number of my stove the same part is listed as compatible again. I planned on returning the kit I received today but now I am not sure. The stove is a Hotpoint; model number: RGB746HED3WH. I would appreciate any help with this as I am confused and don't want to buy a $35 kit if the one I already have will work. Thanks, Carol
1 Answer Carol, according to the model number given the LP conversion kit part number WB28K10045 is the correct kit listed for your appliance. Thanks. Read More...
Rick October 09, 2013 for Model Number GE Gas Range JGB282SETSS Purchased a gas range & need to convert to propane (LP). Cannot find the kit to convert. Do you know number or where to get?
1 Answer Rick, the manufacturer does not offer a conversion kit for your appliance. You'll need to purchase the orifices separately. For the center and right rear burner use part number WB28K10031, left rear burner use part number WB28K10214, left front part number WB28K10215, and the right front part number WB28K10839. Thanks! Read More...
Geneva September 02, 2013 for Model Number JGBP35WEA9WW Hello, I am converting from LP to Natural gas what do I need?
1 Answer Hello Geneva! To convert back to NG you'll need to purchase the orifices. For the medium 1.50MM burners use part number WB28K10022, for the small 1.07MM burners use part number WB28K10029, and for the large 1.68MM burner use part number WB28K10030. Thanks. Read More...