John August 18, 2019 for Model Number JGBP30BEA3WH Hello, I'm converting my GE Range to propane. I can easily find the orifice kit for the 4 top burners, part WB28K10045 - please confirm this is correct: 2 of my burners are 9,500 (NG/LP), 1 is 12,000 (NG/LP), and 1 is 5,000 (NG/LP). I cannot find the oven 16,000 (NG/LP) or broiler 13,500 (NG) /12,000 (LP). Regulator has dual labels, so I just need to adjust it. Thanks, John
1 Answer John, The LP kit is WB28K10045 and the oven bake and broil have adjustable orifice hoods that you would need to adjust. The regulator you remove the cap and spring and turn them over for the LP setting. Read More...
Fred B. May 04, 2018 for Model Number GE 48" Monogram range ZDP486NDPSS I am looking for the LP Conversion Kit. Thanks
Kutol December 05, 2017 for Model Number Kenmore 73433 I purchased a new Kenmore 73433 range but sears cannot do the conversion from natural gas to propane, can I find the parts here?
1 Answer Kutol, We will need to have the full model number of the unit to be able to assist with your question. Read More...
Wendy September 12, 2017 for Model Number JGBP33SET2SS What converter kit do I need to go from natural gas to propane for this GE oven.
1 Answer Hello Wendy, you'll want to order part number WB28K10031 for the right rear, for the right front WB28K10032 and for the left front and rear you'll need part number WB28K10023. Thanks! Read More...
Johan August 24, 2017 for Model Number Eg910dx0 Hi, i need a LP conversion kit for my eg910dx GE stove. It has 4 medium burners, 1 big burner and 1 triple ring fast cook burner. Can you help me to know what the right kit is?
1 Answer Hello Johan. Sorry, this is an international model and we do not offer any parts for these units. Thank you. Read More...
Shaun August 04, 2017 for Model Number JGB720SEJSS I need a LP conversion kit for a GE Adora mod: JGB720SEJSS. What would the part number be? Thanks
Mark March 11, 2017 for Model Number EGR3000ED3WW We need to convert our stove from natural gas to LP. We're not finding our model number on the conversion list. 4 top burners, 1 oven burner, regulator?? Thanks!
1 Answer Mark, To convert this unit to LP you will need the orifices WB28K10031, 2 of WB28K10023 and 1 of WB28K10032. For the oven you will tighten the orifices down and open the air shutters all the way on the burner. Then you would flip the cap on the regulator from Natural to LP. Read More...
Matt February 11, 2017 for Model Number 362.72208891 I need to convert this stove back to natural gas. The previous owner converted the stove to LP and did not leave me the NG orifices or conversion instructions.
1 Answer Matt, To convert this unit back to natural you will need the following parts WB28K10029, WB28K10022, and Front left and right WB28K10030, which are for the top burners. The oven you would loosen the orifices 1 1/2 to 2 turns and then close the air shutters to about 3/4 way open. On the regulator you will need to flip the cap from LP to Natural. Read More...
Earl L January 12, 2017 I am converting a Kenmore range from natural to LP. The model number is worn off due to location. The burners listed as follows. Right and rear 3500 btu, right front 9500 btu, left front 7000 btu, Will kit no. ap2026926 work ? If not what do I need. thanks for your help
1 Answer Earl, Unfortunately we do not have any information on this part to determine if the kit has the correct orifices that you need. Read More...
Michael November 10, 2016 for Model Number 362.75581891 Need numbers for conversion kit from l.p. to natural gas
1 Answer Michael, For the oven you will need to loosen the orifices approximately 1 1/2 to 2 turns and close the air shutter on the burner to about 1/4 open. As for the regulator you will need to flip the cap from LP to natural. The top assembly you will need to get the orifices Left rear WB28K10022, Right rear and left front WB28K10030, Right front WB28K10029, Read More...