Chris April 11, 2014 for Model Number TBX22PASSRWW The interior light bulb keeps flickering off and on when I open the door, and the socket feels loose. How can I access the socket to either tighten or replace it? Thank you!
1 Answer Hello Chris. There is a video that shows how to remove the socket on the parts page. Here is a link for you. http://www.appliancepartspros.com/ge-socket-terminal-wr2x9391-ap2060923.html Read More...
Ben June 02, 2013 for Model Number HTR16ABSHRWW I am a trouble shooter electrician with some knowledge of refrigeration trouble shooting. My tenant damaged my new hotpoint refrigerator and I need to fix it, I found the problem with temp control (rusted due to water damaged) also light socket missing and wires pulled. Do they sell whole complete part with temp control,light and the other stuff that comes with it. If they come I can just plug the wires to the connector and screw it up to the body.
1 Answer Ben, The control section does not come as a whole but you would have to order the parts individually. Read More...
Paul S. October 26, 2012 for Model Number GE Profile Refrodge TBX25PRYDLAA The light in the refridgerator is shorting on an off. I need to replace the socket. After I unplug the fridge, what do I need to do to get at the existing socket and replace it for this model? Thanks
1 Answer Hi. Remove the control shaft knob.Remove one cover 1/4" side mount screw. Then cock the cover off the front of the controls to access the inner control bracket. The bulb is part # 40A15. Then remove the inner control bracket that covers the light socket part # WR2X9391. The socket is held into place by screw mounts. Remove the screw and remove the socket. Thank You. Read More...
Bob October 17, 2012 for Model Number GE TBX18ZLS The light bulb switch seems to work fine but the light bulb in the socket is loose and flickering. What do I have to take apart to get the new light bulb socket hooked up? Thanks
1 Answer Hi. Remove the top shelf. Turn the unit off. Remove the knobs. Remove the control cover. Inside is the bulb part # 8009 and the socket. The pars view does not clearly show how to access the socket but you may need to remove another inner cover to release the socket part # WR2X9391 from its push in tabs and replace it. It is an easy process. Thank You. Read More...
Reece C. October 29, 2011 for Model Number TB14SCB Thank you for all the help so far. I'm pretty handy and just want to be sure of the order of steps I need to take to take to do this bulb socket switch. First I remove both fridge and freezer doors. Then I remove screws holding center mullion in place. This should allow me to remove mullion and bottom floor of freezer to access area for bulb socket replacement. Is there anything else I need to know or anything else you can suggest at this point?
1 Answer Hello Reece. According to the manufacture that is correct. Under the freezer floor there is a piece of Styrofoam that will need to be removed to access the socket WR2X9391. Hope this helps. Read More...
Reece C. October 28, 2011 for Model Number TB14SCB Thanks for answering socket replacement question indicating that I need to remove center mullion and bottom freezer floor to replace socket. Do I have to remove only freezer door to perform above or or do I also have to remove lower fridge door? Do you suggest using a putty knife to pry out mullion?
1 Answer Hello Reece. Yes, you will need to remove the refrigerator door as well. Also, remove the screws holding the mullion in place. Once the screws are removed, you can use a flat blade putty knife to remove the mullion. Hope this helps. Read More...
Reece C. October 28, 2011 for Model Number TB14SCB I am trying to replace the bulb socket on the above unit (which does not have an L or an R after the serial #)and have looked at the parts diagrams and Q and A section. I still am not sure what I have to disassemble to remove the bulb socket.
1 Answer Hello Reece. You will need to remove the center mullion and the bottom floor of the freezer to access and replace the socket WR2X9391. Hope this helps. Read More...
Elaine P. July 20, 2011 for Model Number tbx25pcshrww Inregards to your previous answer. My light is at the front of the refrigerator and does not have a lens over it. I can't tell if it unclips there or if the freezer seperator must be removed to access it.
1 Answer Hello Elaine. You will need to remove the freezer separator to access and replace the light socket WR2X9391. Hope this helps. Read More...
Elaine P. July 20, 2011 for Model Number tbx25pcshrww How do I remove the Light socket for replacement? Mine seems to have a short. It is loose and blinks off and on all the time.
1 Answer Hi Elaine. You will have to remove the power to the unit. Then you will have to remove the light cover lens,and bulb. Then un clip the holding fingers which hold it to the back cover. This will allow the socket to fall back into the evaporator area. then you will need to remove the 4 - back wall screws to access the socket assembly, and replace. Your socket is part # WR2X9391. Thank you. Read More...