1 Answer Sally, There should be a drain option on the control or you would push the cancel button one time to get it to drain. If it will not drain then test to see if the pump is getting 120 vac. If it is but not draining then replace the pump. Read More...
Mark May 17, 2023 for Model Number LDB4548AT Unit is not draining. Can i replace drain pump or is it all one unit ?
Kevin May 17, 2023 for Model Number LDF5545ST/00 My washer makes a loud humming sound when its washing. I think its the pump. Is this a common problem?
1 Answer Kevin, Check the pump assembly for something caught in it and if there is not then the pump would need to be replaced. Read More...
Winnebago2004 January 14, 2022 for Model Number winnebago2004@gmail.com Have LG LDF5545ST seems to clean OK but has become very noisy. would like to know if you can replace the whole pump and motor assembly as one unit. Suspect the bearings going bad in the motor
1 Answer Winnebago, The part number for the pump assembly that is needed is ABT72989206. Read More...
Ellen January 10, 2022 for Model Number LG dishwasher LDP679#** The water does not drain. Ive checked the filters, checked the drain hose for blockage. Ive even snaked the drainpipe leading away from the sink drain. Any suggestions?
1 Answer Ellen, Test to see if the drain pump is getting 120 Vac and if it is but will not drain then the drain pump will be the issue and will need to be replaced. Read More...
Cathy October 20, 2021 for Model Number LDF5545BD Delayed start up after about a minute gives a ie code which is no water checked water supply was good replaced water inlet valve still slow start up as well as same ie code
1 Answer Cathy, The IE error code means the machine did not fill with the prescribed amount of water in the allotted time. The water valve or stopped-up inlet screens and/or the household water pressure could be the cause of this error. Read More...