Jack Kreska December 05, 2020 for Model Number WT1201CW I'm replacing hinge mount P/N AP5683236 that screws in from under the top of the washer. I have removed the lid and the black hinges. Now I need instruction to remove whatever it takes to reach the screws holding the AP683236 in place so I can put the new one in.
1 Answer Jack, Once you have the lid and hinge removed, there should be a couple of screws at the back of the unit or under the control panel that you will remove to be able to lift the main top of the unit. Once these have been removed you will have access to the hinge assembly. Read More...
Bob November 30, 2019 I'm replacing hinge mount your PCN AP5683236 that screws in from under main lid. Need instruction to removal lid , washer LG model WT1101CW. Thanks
1 Answer Bob, the lid will need to be lifted up to access the hinge panel located at the bottom of the lid on each side. The hinge panel can be removed using a small flat screwdriver. Once it is removed, there will be three screws holding the hinge in place that will need to be removed to allow the hinge to slide away from the mount, allowing it to be removed and replaced. Read More...
Bob November 25, 2019 for Model Number WT1101C Ordering a replace hinge, does it come with instruction, steps to do the replace?
1 Answer Bob, the lid will need to be lifted up to access the hinge panel. The hinge panel can be removed using a small flat screwdriver. Once it is removed, there will be three screws holding the hinge in place that will need to be removed to allow the hinge to slide away from the mount, allowing it to be removed and replaced. Read More...
Lew H June 04, 2018 for Model Number WT1101CW Trying to determine if the hinge for the top lid on this top loading LG washer pops out for replacement or is screwed in from below ?
1 Answer Lew, It would appear that the hinge will screw into the unit under the main top. Read More...