Ezequiel November 30, 2016 for Model Number WM2233HU Machine in Mexico, Tech said that the machine needed the card, won't sale in mexico. does it means the control board ? or in and out card like credit card type of card? what is the price for the control board? Thank you.
1 Answer Hello Ezequiel. The part needed EBR32268004 has been permanently discontinued by the manufacturer and we don't know of any source or replacement for the part. Read More...
Maureen November 11, 2016 for Model Number WM2233HU I purchased a replacement control board on eBay part #ebr32268004. I found a video how to swap out the ebr32268001. Would the process be the same?
1 Answer Maureen, Yes changing the control board on your unit would be similar to the video that you located for the other board. Read More...
Nigel July 22, 2016 for Model Number WM2233HS What can I do to get a replacement part for EBR32268004 which seems to be discontinued....
1 Answer Hello Nigel. Sorry, this part has been permanently discontinued by the manufacturer and we don't know of any source or replacement for the part. Read More...
Carlos March 26, 2016 for Model Number wm2250cw Ok machine starts then goes directly to error pf then shuts down. Sometimes its starts the cycle then shuts down. Could it be a main board problem?
1 Answer Carlos, You will want to test power to the unit when you turn it on to see if there is a voltage drop. If there is no drop then the issue would most likely be the main control board. If there is a drop then you will need to check the power supply to the unit. Read More...
Jr July 17, 2014 I have power through the filter. Is there anything other than the control board? No lights on panel or nothing.
1 Answer Hello Jr. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Heath June 02, 2014 for Model Number wm2233hs Washer does not drain when running a normal cycle but when in test cycle it drains fine. Not a filter issue and doesn't appear to be a pump issue. I would guess a bad controller? Any ideas?
1 Answer Hello Heath. If there is no power to the drain pump, and the wiring harness is good, you will need to replace the control board on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...