Gerardo March 21, 2020 for Model Number LRE30757ST/00 Two heating elements don't work in my range. The back left and the 11.75" Right front. I checked the rear front element for continity and it works the front shows continuity in the inner in one of the elements not so sure how to get to the external one. The issue I found i the erratic behavior of the two elements mentioned before they work randomly. If the rear I turned high. It works but when I take it to a 5 or six it does not comes back at all or do not heat what suppose to heat. The dual right front it hardly works. After several trials it did work once as soon as I change temperature it died. I also notice when I turn two of the small ones, the one that does not work properly dies completely.
1 Answer Gerardo, The elements sound like they are working and this would be an issue with the control board that is causing this issue. Read More...
Grant February 09, 2019 for Model Number LG Range #LRE30757-ST On LG range, the right rear burner will not operate. The digital display shows ON and the settings but the coil will not heat up. When I press the button to turn on, I can hear the click like usual, that is all. I replaced the coil, sill no function so it must be one of the circuit boards in back. All other functions on this range work as usual, just not the one burner. Please suggest the correct board to repair this issue?
1 Answer Grant, The part that would be needed for this issue will be the pcb sub assembly 6871W1N011D. Read More...
1 Answer Jose' , Yes, the 6871W1N011D / 6871W1N011D PCB Sub Assembly would be the most likely problem, the relay is stuck and sending constant power to the burner element and causing the burner to remain on. The part is in stock and available at this time. Thanks, Read More...
Ben November 28, 2016 for Model Number LSC5633ws/01 Oven gets to temperature and eventually just shuts off. All other components work.
1 Answer Ben, With this issue, the most likely cause would be that the control board is faulty and would need replaced. Read More...
Ben November 26, 2016 for Model Number LSC5633ws My oven starts and gets to temperature and a short time later it shuts off by itself.
1 Answer Ben, You will want to test the oven sensor to make sure that the sensor is reading 1090 ohms of resistance. If this checks ok then the issue will likely be in the main control board of the unit. Read More...
Justin April 02, 2016 for Model Number LRE30757ST Hello, my oven will not reach proper pre heated temperature. Set to 350 degrees and it will take a long time just to reach maybe 190 or 200 and just stop. Temperature sensor tested out correctly. I am not sure if this issue is in the Oven Relay Board or the Main PCB Board.
1 Answer Justin, This issue would most likely be caused by a faulty oven relay control board part number EBR32401002. Read More...
Gac February 15, 2016 for Model Number LG LRE3083ST/01 On this model only one burner works, no response from other burners, nor does the oven work although the oven light comes on. No function keys work except for one burner. Also, the clock displays however, cannot adjust time. Can you tell me what part I might need?
1 Answer Gac, You will want to check the power supply to the unit to ensure that there is 240 vac to the unit. If there is proper power then the most likely cause for this issue would be a faulty Oven control board EBR74164805. Read More...