Tony March 11, 2024 for Model Number WT5480C WT5480C When washer is done spinning the cloths are still really wet. Washer seems to be spinning correctly.
1 Answer Tony, Check to ensure that the drain pump is not clogged and make sure that the unit is not getting off balance. Read More...
1 Answer Michael, The model number listed is not showing as a good model. Please resubmit your question with a valid model. Read More...
1 Answer Fred, if water comes through even when the power cord is unplugged, the water valve 5221EA1008F would need to be replaced. Read More...
Scott W. November 01, 2021 for Model Number dswisener530@gmail.com OE code on Kenmore Elite top load washing machine. Model # 796.31622310 Water will not drain out of tub. All hoses are clear. Pump making unusual noise. Would I be correct in replacing the pump?
1 Answer Scott, It would be recommended to check and make sure that there is nothing caught in the pump housing or the filter first and then if it is clean and this issue is occurring then the pump would be the most likely cause. Read More...
Mark July 06, 2020 for Model Number WT1101CW During spin cycle, the water won't drain. Hoses are clear and free of any kinks, and I do not see anything blocking the pump when I remove it. Since I can't return the new drain pump if I install it, is there a chance this could be something else besides the pump? Error code OE.
1 Answer Mark, You may want to check to see if you're getting voltage(120 VAC) to the drain pump from the control board, then replace the drain pump 5859EA1004P if you are getting the voltage. Thanks, Read More...
Lewy July 01, 2020 for Model Number LG WT7600H*A Is there a filter catch basket prior to the water discharge pump?
1 Answer Lewy, there is not a coin catch filter used with the model provided. The water will go straight through the tub to pump hose to the drain pump 5859EA1004P impeller housing. Read More...
Henry January 18, 2019 for Model Number WT1101CW My LG washer has water coming out from the right front during the spinning cycle. No water anywhere else. Could this be coming from the pump and running to the front on a slight uneven floor?
1 Answer Henry, These units have had issues with the water valves leaking. You can remove the top cover and visually look and feel the water valves for leaks. Read More...
Nick January 10, 2017 for Model Number wt1501cw OE code keeps showing up and washer stops draining hit start button again and it finishes draining and spinning cleaned out pump and hose check good on multimeter test what else could cause it
1 Answer Nick, The OE error code will represent that the water is not completely drained within 12 min. With the drain pump being cleared this will either be a weak drain pump where the impeller is bad, the wiring is bad between the pump and the control board or the control board is faulty. Read More...