Beth J. November 23, 2012 for Model Number DLG3788w My dryer stopped rotating . Before that it sounded like metal on metal with occasional squeaking. It appears the front roller is shredding a bit. The belt is intact. I believe I just need one roller. What is the part number and are they available?
1 Answer Hello Beth, If one failed, the others aren't far behind. I would not recommend to only replace one but all 4 drum rollers 4581EL2002L and the idler pulley 4560EL3001A to prevent going back in too soon. If a roller locks up during the cycle it will break the belt and cost you even more. Also, as a note, use a dry paper towel to remove any residue from the roller shafts before installing any of the wheels to prolong their life. Read More...
Nick November 13, 2012 for Model Number DLEX7177RM My dryer makes noises when running. I think it is the roller assembly, but how do I access it, from the front, rear, or bottom? I don't know where to start taking the dryer apart.
1 Answer Hello Nick, To access the roller assembly you will have to remover the top cover. There should be a couple of screws holding the control panel in place. Remove control panel. There should be screws to remove front panel. You would remove front panel and remove drum. With drum removed you can access the roller assembly. Read More...
Frank S. October 19, 2012 for Model Number DLE3777W Hi, I have an LG Tromm dryer that started making a loud vibrating type noise all the time when running. It dries the clothes normally. Any idea what could be causing this? Thanks!
1 Answer Hello Frank, This is most likely either a drum roller 4581EL2002L or an idler pulley 4560EL3001A. Be aware that there are four drum rollers inside the unit. Two in the front and two in the rear. Read More...
Joe April 25, 2012 for Model Number DLG2522W Is it possible to replace LG supports (rollers) by regular Kenmore dryer rollers due to availability ?
1 Answer Hello Joe, The LG support rollers 4581EL2002L are available. Unless you could get the manufacturer to show a satisfactory cross of the numbers, it isn't feasible to try as it could cause damage to the unit and could possibly become a hazard electrically. Read More...
Shane March 22, 2012 for Model Number Dle5977s There are two different rollers listed 250 and 251, What are the diffences and which one should I get for my dryer?
1 Answer Hello Shane. There is no difference in part number 250 and 251. They are both part number 4581EL2002L for the roller kit. Hope this helps. Read More...
Maria I. January 21, 2012 for Model Number DLE5977B Want to order LG dryer drum roller DLE 5977B. How many does my dryer need and what is the difficulty level of installation?
1 Answer Hello Maria! The drum support roller assembly is part number 4581EL2002L. I have emailed the service manual to you for your appliance. This will help with the installation. Thanks! Read More...
Tony December 29, 2011 for Model Number DLE 9577sm LG Our drier is a few years old and has a large thump like a shoe is in the drier. Is it the drum support roller? Should I or do I need to replace all four?
1 Answer Hello Tony. Yes, it sounds like the roller 4581EL2002L is bad and will need to be replaced. It is best to replace all 4 at once. Hope this helps. Read More...
Bill H. November 04, 2011 for Model Number dle5977s How many roller assemblies do I need for this LG dryer, and are they in stock? Thank you.
Bryan August 23, 2011 for Model Number DLG8388NM What is the part number for the guide rollers? How many do I need? I also need a belt.
1 Answer Hello Bryan! The roller assembly is part number 4581EL2002L. You will need four of these. The belt part number is 4400EL2001F. Thanks! Read More...
1 Answer Hello David! Yes, the lock washers will come with the new roller 4581EL2002L. Thanks! Read More...