Kari June 07, 2019 for Model Number DLE5955W 2 yrs ago I replaced the front 2 wheel bearings as the front right failed. A yr ago the same one failed so I replaced the front 2 again...6 months later the same right front wheel failed, so I replaced this time all 4 rollers. I made sure it was level, checked the pulley and the belt, all look great! Fast forward to today(4wks later) and my back right wheel ceased up on me. Any thoughts on what I am doing wrong?. The rollers are compatible to the LG 4581el3001a
1 Answer Kari, Try to lubricate the shaft of the roller and if this does not correct then it may need to have the shaft replaced. Read More...
Cris Crismon May 24, 2019 for Model Number DLG0332W Since I am going to have to take the dryer apart, how many rollers are there if I replace all of them? 3 or 4?
1 Answer Hello Cris, the model number supplied uses a quantity of four of part number 4581EL3001E. Thanks! Read More...
Anthony January 22, 2019 for Model Number DLE2516W I ordered replacement drum rollers for my LG tromm dryer part #4581EL2002C and I received part #4581EL2002A Are these parts interchangeable for my dryer and what's the difference between the parts?
1 Answer Anthony, part number 4581EL2002C is the new part number for the 2002A. They are the same as far as application and dimensions. Read More...
Leimomi December 31, 2018 for Model Number DLE5955G My dryer is very very loud and I've learned that the rollers need to be replaced. My question is how do I know if the support rollers need to be replaced as well?
1 Answer Leimomi, In most cases the support would not need to be replaced in the case of the rollers needing replaced. Read More...
Jim Harrington December 03, 2018 for Model Number dlex8000w are all four dryer wheels the same size that the drum sits on
Marsha November 14, 2018 for Model Number DLE5977S Our dryer is making a thumping noise. Do you suggest to replace all four rollers? Do we need 2 of #4581El2002C. And 2 of#5481EL3001E ? Thank you Marsha
1 Answer Marsha, It would be recommended to check the drum to make sure that the weld on the drum has not come loose around the roller area and if this checks ok then you would want to get the roller part number 4581EL3001E and would need 4 of these. Read More...
1 Answer Hello Farrah, Yes, part 4581EL2002L are the drum rollers recommended by the manufacturer for the model provided. Read More...
1 Answer Hello Eugene, You should never put a lubricant on the drum rollers since lint will stick to the lubricant and get pulled into the bushing. This will wear the bushing out faster than dry installation. the bushing is impregnated with a dry lubricant that will lubricate as it wears. If a lubricant has to be used, cornstarch or baby powder should be used. Read More...
Gary June 01, 2018 for Model Number LG dlg5988s If I replace the rollers only without the axles what lube do I use on the axle?
1 Answer Hello Gary, You should use a dry paper towel to clean the shafts and install the rollers dry. They are impregnated with a dry lubricant so when they wear, they self-lubricate. Never use a wet lubricant on the rollers since lint will stick to it and be pulled into the bushing and they will fail prematurely. If you must use something, use cornstarch or baby powder and do not use too much. Rotate them before reassembly since they can bind with too much. Read More...
Harry April 03, 2018 for Model Number LG DLE5977W Does this Drum Support Roller Assembly AP5688895 include all rollers required or do I need to order four? Thanks
1 Answer Hello Harry, I'm sorry but 4581EL2002L is one drum roller only. If four are needed, you will need to order four. Read More...