Mark Scott June 29, 2014 We need to replace part # AP4169151 on Samsung fridge model # RS2630SH. Could you please send instructions on how to do that? Thank you, Mark Scott
1 Answer Mark, You will want to remove the drip pan from the dispenser. At the bottom of the dispenser there should be 2 slots. You will use a flat blade screwdriver to slide under and pop the trim off. Once popped off you remove the screws and remove the old part and install the new part. Read More...
Jennie April 28, 2014 for Model Number RS261MDWP How do I order a part? Not sure what the part number is. The part I need is the cover where you press for the type of ice or water. The cube button works so does the water button. The button for crushed ice doesn't work, I tried using it and when I did a plastic piece fell in my glass. Please let me know thanks.
1 Answer Jennie, The part number that you are looking for the cover of the dispenser is part number DA97-08118P. Read More...
Billy October 01, 2012 for Model Number RS2630SH Samsung going to replace DA97-02050A "Hello Terry, I tried to send you some information from Samsung giving illustrations on the removal of the dispense cover but your e-mail refused delivery. If you could please post a valid e-mail address, I can resend and help get you through the repair" Can you send me a copy of the directions to remove the front cover?
1 Answer Hi. A couple of things to check. Use a volt/ohm meter part # MA-DM1 to assist you in your diagnostics. Measure the resistance of the heating element. Make sure the element is not shorted to the case one element terminal at a time. Remove the element and look at it between the windings to see if it has expanded and shorted. This will make it stay on during cool down. It is part # WP3387747. The 2nd device is the thermistor part # WP3387134. It should be open at cold temperatures. If the inner contacts have welded itself closed then it will not open. Providing constant voltage to the element. It is best to also change the safety thermostat part # 279816 because it is being weakened as well. Thank You. Read More...
Terry July 16, 2012 for Model Number RS2630SH How do I replace the part# AP4169151? You answered another person by saying unsnap the front cover. Should we pull to unsnap from any point or is there a best place to begin the unsnaping? for Model Samsung RS2630SH
1 Answer Hello Terry, I tried to send you some information from Samsung giving illustrations on the removal of the dispense cover but your e-mail refused delivery. If you could please post a valid e-mail address, I can resend and help get you through the repair. Read More...
Justin November 17, 2011 for Model Number RS2630SH How do I install part number AP4169151 on Samsung fridge RS2630sh?
1 Answer Hello Justin. Unsnap the front cover off the dispenser. Then remove the screws securing the assembly in the dispenser. Once removed, you can pull out the old assembly and install the new assembly DA97-02050A. Hope this helps. Read More...
Joe November 08, 2011 for Model Number Part # Ap4169151 How do I install part # AP4169151? On a Samsung refridge.
1 Answer Hello Joe. We will need your model number to help you with this. Thanks. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Wes June 15, 2011 for Model Number RS2630sh How do I replace the ice dispenser I received from you guys? There were no instructions with it.
1 Answer Hello Wes. If you provide your email address, we can send you the service manual. Hope this helps. Read More...
1 Answer Hello Sean. If you can provide your email address, we can send you a copy of the service manual. Hope this helps. Read More...