Larry S October 30, 2020 for Model Number DMT400RHS/XAA My neighbor's Samsung DMT400RHS/XAA dishwasher has the heavy duty button flashing and it isn't working. You can't change it to a different cycle. Can you tell me what this flashing light means? Is it the controller card that is bad?
1 Answer Hello Larry,the control board through the base mounted water leak detector sensor is detecting water leaking into the base of the dishwasher, that would be the area to check for a leak , once corrected and the sensor dries out, the control board will allow normal operation. Read More...
Jim C November 05, 2017 for Model Number Samsung DMT400RHS-XAA The dishwasher will not drain. The Delicate light flashes I have cleaned the screen and replaced the drain hose. Samsung thinks it could be control unit. Which part do I need to purchase to resolve my issue?
1 Answer Jim, This would be a drain error in which you will want to check the drain pump to make sure that it is not clogged and check to make sure that the drain pump is getting power to it when in drain. If it is getting power then the drain pump would be the issue and if not then it will be a faulty control board. The drain pump part number is DD31-00005A and the Main control board is DE92-02256C. Read More...
Mike August 18, 2016 My samsung dishwasher #DMT400RHS only cycles fill and drain. It does it about 4 times and the control panel lights start flashing. Is it pretty likely that the display assembly is bad?
1 Answer Hello Mike. Make sure there is no stuck button on the control panel. If it is good, you will need to replace the main board DE92-02256C on the unit. Read More...