Dafna January 08, 2026 for Model Number NE58K9430SS/AA Adding more info: Display buttons do not work and display is black. The oven does not turn on. Is it the display board or control panel? Cooktop works.
1 Answer Hello Dafna, and thank you for your question. This could be caused by several parts, and testing would be needed to identify which one would be the cause. Testing at the main control DE92-03960A would need to be tested at connection CN100 for 120 Volts AC from the black wire to the white wire. If voltage is not present, the hi-limit thermostat DE47-20037A has likely failed. If voltage is present, the connection CN470 would need to be tested to identify if 5 Volts and 12 Volts DC are present. If not, the main control has likely failed. If the voltage is found, then the sub pcb DE94-03610A is the likely cause of failure. Read More...
Melanie October 16, 2023 for Model Number NE58K9430SS/AA My cooling fan stays on. I unplugged the appliance, plugged it back in and it stayed off for a few minutes and back on it goes.
1 Answer Melanie, the oven sensor DG32-00004C would need to be tested for resistance and it should measure around 1100 Ohms at room temperature. If the sensor tests good, the failure would likely be in the main relay control DE92-03960A. Read More...
Lee May 23, 2023 for Model Number NE58K9430SS/AA-00 How do I test this part to see if it has failed? I am not getting any power to my range at all.
Daniela May 23, 2023 for Model Number NE58K9430SS/AA-00 My bake element isn't getting to the correct temperature. I have replace element, but it hasn't made a difference. Could I be having an issue with this board?
1 Answer Daniela, it will most likely be the main control that regulates power to the elements, DE92-03960A Read More...
Jamie May 23, 2023 for Model Number NE58K9430SS/AA-00 I am getting a C-F2 error code on my range. It is stating that there is a communication error between the touch pad and the main board. How can I determine which one of these is the issue?
1 Answer Jamie, This is an error code that would be a communication error between the main board and the touchpad. Check whether the connector of the sub pcb has been inserted. If no issue with the connector then replaces the sub PCB and if this does not correct the issue then replace the main control board. Read More...