Mindy March 05, 2012 for Model Number mde3500ayw How many screws are needed for the baffle to be installed? The screws fell into the housing of the dryer. As per my previous question, I beleive it is the large baffle (widest length is 16 1/2").
1 Answer Mindy, your unit uses two tall WP33002032 and one short WP33001755 baffle. The unit calls for six baffle screws 33002973, two per baffle. Thanks! Read More...
Kim January 02, 2012 for Model Number mdg7600aww The short baffle has fallen off. How do I get to it to and what screws do I need? Thanks
1 Answer Hello Kim. You will need to remove the door, and the clips and the front panel of the dryer. Once removed, you will remove the two brackets holding the top assembly down. Then raise the top and turn the tub by hand until you can install the baffle WP33001755. You will use 33002973 for the baffle screws. Hope this helps. Read More...
John January 02, 2012 for Model Number MDE3000AYW DRYER- ELE One of my baffles is missing, do I need all three for the dryer to work properly ? Thanks John
1 Answer Hello John. Yes, you will need to replace the missing baffle WP33001755 for the dryer to work properly. Hope this helps. Read More...
Cluless In Ga December 26, 2011 for Model Number MDE7600AYW How many of each size baffle are standard in this dryer? Mine are missing all 3! Received dryer as a favor from a friend missing two and the third just broke off. Thank you!!
1 Answer Hello. You will need to order 2 tall WP33002032 and 1 short baffles WP33001755 for the dryer drum. Hope this helps. Read More...
Napoleon August 24, 2011 for Model Number LDE5910ACW Baffles are tighten and I'm ready to reattach the top of the dryer to the front panel. Parts in hand include the (2 screws) for the top for each corner and (2 green)clips. Question: Do I tighten the two screws first then put in the clips? If so how are the 2 clips installed? Thanks. Nate
1 Answer Hello Napoleon. You will connect the two screws and front panel first. Then put the clips back into the slots on the front panel with the lip of the clip facing toward the front. Close the top of the dryer until it locks into place. Hope this helps. Read More...
Napoleon (Nate) H. August 22, 2011 for Model Number LDE5910ACW Do you know the part number for the clips that attach the top of the dryer to the front panel? Thanks, Nate.
Susan June 21, 2011 for Model Number MDE5500AYW Can I put the baffle in the dryer without removing any part of the dryer because my baffle fell off ,and I can see the holes where the baffle is located? When I get the new baffle with the screws, can I just snap it in with the screws in place. Thanks for your answer.
1 Answer Hello Susan, to install the baffle correctly you will have to remove the top panel in order to screw down the baffle's. Thanks! Read More...
1 Answer Hello Mario! To replace the dryer drum baffle WP33001755 you will need to remove the door and front panel. Lift the top cover. Rotate the tumbler until you see the baffle screw holes location to install the baffle. Screw the baffle in place. Hope this helps! Read More...
1 Answer Hello Kevin. You will need to look inside the drum and see if the short one WP33001755 is needed or the long WP33002032. The short is around 3 1/2 inches tall and the long is around 4 1/2 inches tall. Hope this helps. Read More...
Chad April 11, 2011 for Model Number mde550 Maytag dryer I was wondering if I need a tall or short baffle? I see both are sold.
1 Answer Hello Chad! Your model uses two tall baffles WP33002032 and one short baffle WP33001755. You will need to measure your current one to determine the one needed on your appliance. Thanks. Read More...