Customer Questions and Answers for Dryer Drum Baffle by Whirlpool

Stewart F, Thank you for your question. The correct part number for the baffle that you would need will be WP692490. There will be 2 long and one short.

Edward, it is recommended that all three baffles 4432EL1002A are in place. A missing baffle can affect the dryer's performance and if there are any burs where one attaches, it can snag onto clothes.

Confused, as the original screw is a #9-15x1 screw 33002973 that has been discontinued, the only other option would be taking a screw from another baffle and using it as a comparison for diameter and thread type. The length would need to be 1" though.

Hello Russ, The model number provided uses two WP33002032 and one WP33001755.

Keith, there would be two tall baffles WP33002032 and one short baffle WP33001755 used with the model number provided. As the unit is designed to operate with this being the case, it would be recommended that the original design is maintained.

Hello Ashley, the drum should have 2 tall WP33002032 and 1 short WP33001755 baffle.

Paul, There are two baffles that are tall and the other is 1 inch shorter.WP33002032 for the tall and WP33001755. There are three altogether. 2 tall and 1 short.

Kees, the use of the two heights allow for an efficient lift and distribution of the clothes when they are tumbling during a drying cycle. The two tall baffles WP33002032 and the short baffle WP33001755 are going to work to allow for the most efficient drying in the design of your model.

Hello Glenn, You will need to order two WP33002032 and one WP33001755 for the4 model provided.

Hello Violet. You will need to order 2 tall WP33002032 and 1 short WP33001755. You will also need to order 6 screws WP33002973. Thank you.