Customer Questions and Answers for Dryer Drum Baffle by Whirlpool

Carlos, You will need to get 2 of the short baffles and 1 of the tall baffles for your unit.

Hello Shannon. You will need to order 2 tall WP33002032 and 1 short WP33001755. You will also need to order 6 screws WP33002973. Thank you.

Larry, The WP33001755 drum baffle, will not work in your dryer. it"s a different configuration and wont mount to the drum. Your dryer already has the tall baffles installed 8565688 / 8565688 Baffle Drum ( HI) and all three should be the same. You may want to check for any fabric softener deposits on the tumbler, a build up can cause the articles to tumble incorrectly, check the tumbler speed. The drum should rotate at approximately 50 RPMs(+/-2) If the tumbler speed is in range, the drum and bulkheads are clean, you may want to add a clean,dry, heavy article to the blanket or comforter to "break up" the load. (a small childs tennis shoe, or a couple or three clean/new tennis balls usually work pretty good).

Hello Marie. You will need to order WP33002973 for the screw needed.

Hello Mike. You will need 2 of those as well.

Hello Mike. Yes, most likely it is the rollers or the roller supports WP6-3129480. It is usually best to replace both.

Hello Mike. You will need to order 2 rollers 12001541 if the squeaking is coming from the rollers.

Hello Mike. You need to check the seals WP33001807 and the rollers 12001541 on the unit.

Daniel, the short baffle WP33001755 is approx. 17 1/2" x 2" and the long baffle WP33002032 is approx. 17 1/2" x 4". Thanks!

Michael, the baffle screw is part number 33002973. This item comes one per package. Thanks!