Tom February 14, 2012 for Model Number ykera807 How difficult it it to replace this cooktop? Would I just remove the edge moldings and slide it out and then slide in the new one, or are there electrical connections to deal with? Thanks.
1 Answer Tom, It's not a difficult repair, but more than you described. "REMOVING THE COOKTOP GLASS : 1. Unplug range or disconnect power. 2. Pull the range out of its mounting location so that you can access the rear of the unit. 3. Remove the control panel and rotate it forward. "a) Open the oven door, and remove the screws from the bottom of the control panel b) Remove the two cooktop trim screws. c) Slide the cooktop trim back to expose the end cap screw, and remove the screws" 4. Remove the screws from the left and right side trim, and then from the rear trim. Remove the trim pieces from around the cooktop glass. 5. Remove the cooktop glass brackets from the left and right sides of the range. 6. Lift the rear of the cooktop glass off the range, slide it out from under the front control bracket, and remove it." Thanks and Good Luck Read More...