Customer Questions and Answers for Door Closure (Wht) by Whirlpool

Hello Dick, seems the manufacturer has subbed the original door bushing to this part. It takes the place of several similar part numbers, and the inside has no cam surface.

Dharmesh, This has a door bushing that would most likely be the issue and is part number WP67002721.

Hello Vince. It sounds like the HV board WPW10310240 has failed and will need to be replaced on the unit. It is located on the back of the unit. You will need to remove the access cover to access and replace the board.

Hello Lourdes. You will need to replace WP67003638 on the unit.

Hello Alan. If your unit is white, you will use WP67003638.

Michael, you'll need the door closure WP67003638 and thimble WP2182181. Thanks!

Hello Joan. Sorry, there is not a door stop for that. You may be able to put a home door stop on the cabinet to keep the door from hitting the cabinet.

Karl, You would want to get 2 of part number WP67003638 door closure.

Hello Keith, To remove the door to replace the door closure WP67003638 you will first remove the upper hinge cover. This will be held in by either a 5/16" screw or a phillips head screw. You will want to remove everything from the door. Then with the hinge cover removed take the screws from the upper hinge and remove hinge. With upper hinge off you will open door slightly and lift of and turn upside down to access the closure. You may also want to check all your shelving in the refrigerator section to make sure that it is properly seated and not causing door to be pushed on.