Katherine November 11, 2023 for Model Number WEG760H0DS0 The start button will not work. All other buttons function
Bob June 06, 2022 for Model Number WEG730H0DS0 None of the electric works on my gas range. Not the ignitors, not the oven light, not the display ,nothing. I'm thinking control board W110550551 needs replaced. Is this correct? Thanks
1 Answer Bob,Based on the model number provided I would check the incoming power to the range, Per the wiring diagram for your model the power for the surface ignitors does not come through the board. Read More...
Fred December 17, 2021 for Model Number weg730h0ds0 part # w11050551 main control board has just arrived. Is there a way to check the board to see if it is good before it is installed ?
1 Answer Hello Fred, If you are testing for bake remove the red wire with a white trace from the ignitor board terminal J1-6. Make sure it cannot contact ground or any metal surface. This wire should show 120Vac on it when the unit is set to bake. If it does not, the relay on the board has failed and the board is bad. If it shows 120Vac, the issue will be the DSI board, (spark module) W10860916. Read More...
Tim Rogers July 08, 2021 for Model Number WEG730H0DS0 Lost the neutral to part of kitchen wiring. Display showed a complete "reboot" display, then went blank. The ignitors work on the stove, but there is no control display at all. I unplugged and replugged the power, but cannot get a display. Is this the electronic control board or the display board? Thank you. P.S. Neutral has been restored. Full 120VAC at outlet.
1 Answer Tim, Based on the information, this would most likely be that the control board is faulty and would need to be replaced. Read More...
Stephen June 18, 2018 for Model Number WEG730H0DS Oven controls show F1E0 error. How do you test to see if it is the control board (AP6023344) or Cntrl-Elec (AP6042019)?