Dave October 28, 2023 for Model Number MHW5500FW0 When we try to start a cycle sometimes it will shut itself off on its own. Sometimes at start of cycle it will unlock the door, then lock it again and start the cycle. If you use the knob to turn it on the machine (not using the power button) the "my cycle" and" cycle signal" lights will toggle on and off. It randomly flashes the lights for no apparent reason. I tend to think the control board is going nuts.
1 Answer Dave,You should have a tech sheet for the unit under the lid. Run a diagnostic cycle and check for error codes for a starting point. Read More...
Paul September 02, 2023 for Model Number MHW3505FW1 "MHW3505FW1 After power turned on, lights and beeps will happen randomly. All indicator lights act up. But only dial is on normal cycle. On other cycles, it behaves and I can start a wash cycle, which completes ok, but with before mentioned random beeps. I ran a test on it and nowI am getting error code F05 E04 on my panel. "
1 Answer Paul, based on the information provided, the user interface panel W10911040 has failed and is causing multiple symptoms. Read More...
Loretta September 02, 2023 for Model Number 7MMHW5500FC0 "7MMHW5500FC0 Some of the buttons on my control panel will work and some wont. I removed the control board and wiped it with a dry cloth then reconnected it. Still buttons wii not respond. I then unplugged it for 10 minutes at the circuit breaker. Still not working. Is this a control board issue or something else? "
1 Answer Loretta, this would be a failure in the user interface W10911044 and it would need to be replaced. Read More...
Donnie September 02, 2023 for Model Number MHW5500FW0 MHW5500FW0 I am getting error code F1E1 on my washer. I have unplugged the washer and reset it. Still getting the F1E1 error code. What part do I need the fix it?
1 Answer Donnie, the error F1E1 is going to indicate a failure in the appliance control board W11201285 and it would need to be replaced. Read More...