Po April 19, 2011 for Model Number wfw8410sw02 Washer is on, but when the start button is depressed in order to start a cycle, the machine shuts off. Is this a problem with the user interface (8571919) or Microcomputer, Machine Control (W10160255) or some other problem?
1 Answer Hello Po. Here are the instructions from the manufacture when the machine will not start. Hope this helps.1. Open and close the door. The door has to be opened between consecutive wash cycles.2. Check the door switch/lock unit running Drain cycle.3. If door is locked, drain the unit. Remove lower cover and drain by opening the Pump filter. Release the door as described in thesection Manually Unlocking the Door Lock System.4. Unplug washer or disconnect power.5. Check the resistance of the motor pump. 6. Check the drain pump filter for foreign objects.7. Check all wire harness connections to the CCU are not broken or wires detached and connector’s internal pins are visible.8. Check all the green wires (ground harnesses system) are not broken or wires detached.9. Check the two ground switches are pressed correctly by the toe and rear panels.10. Plug in washer or reconnect power.11. Check the button/LED assembly by selecting different cycles and changing the modifiers and options available to confirm the button/LED assembly is responding.12. Replace the CCU. Read More...