Phil February 17, 2016 for Model Number DU1145XTPQ9 I did the diagnostic supplied in the tech sheet which led me to a failed key pad. Do I need to replace the entire control panel to do this or is the keypad sold separately? Also is a new board included in that control panel or can I reuse the old board? Thanks
1 Answer Hello Phil, The control panel WPW10142946 has to be replaced as the complete assembly since the membrane switch is not available from the manufacturer individually. Read More...
Jo June 01, 2014 for Model Number DU1145XTPQA The control panel buttons have cracked and now are peeling off. Can I replace the buttons or do I have to totally replace the control panel?
Ilidio March 19, 2013 for Model Number DU1145XTPB7 Heated Dry is blinking and if I touch the start button the normal button will blink also.
1 Answer Ilidio, This error would indicate that there is a stuck key on the display. Try to turn power off to unit for 30 minutes. Reconnect power and if the problem persists then replace the membrane WPW10142945 . Read More...
Ty October 27, 2012 for Model Number du1345xtvb1 Dishwasher would begin a normal cycle and within a few minutes the dishwasher would shut off. All lights turn off and then the machine completely shuts down. After a few attempts the cycle would complete. Now today I am unable to select hi temp, normal wash or start. All other selections can be chosen including cancel/drain.
1 Answer Hello Ty, This sounds like the control panel WPW10142945 has a stuck key. There is a tech sheet behind the kick panel which tells you how to run a self-diagnostic mode. If you cannot find it or you need further assistance, please let us know. Read More...
John N. May 26, 2011 for Model Number DU1145XTPB7 Once the leds start blinking, they don't stop until I turn off the breaker. When I turn it back on the nornal led starts blinking and doesn't stop, just on off.
1 Answer Hello John. If the button are non responsive, you will need to replace the control panel WP3385735. Hope this helps. Read More...
John N. May 26, 2011 for Model Number DU1145XTPB7 Yesterday, wile my dishwasher was not in use, all of the leds on the control started blinking. When I tried to start it nothing happened. I cut the power for one minute to reset it and all of the leds stopped blinking except the Normal cycle button. I tried the start/resume button but nothing happened. When I pressed the cancel/drain button it start blinking. I tried resetting several times with the same results. Thanks, john