Whirlpool Dishwasher Touch Pad

The Control Panel is an OEM replacement part for Whirlpool built-in dishwashers. It is the control panel located on the front façade, comprising buttons to select cycles and indicator lights showing progress. This interface allows for efficient operation through simple input of wash selections. 

Causes of a failing control panel involve damage to electronic components from moisture exposure over time. Wiring degradation or faulty circuit boards can also disrupt intended functions.

Symptoms of an inadequate control panel include:

• Unresponsive buttons that do not initiate cycles  
• Light indicators that do not illuminate properly
• Erratic or unexpected dishwasher behavior

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Console Assembly is an OEM part for Whirlpool dishwashers. This assembly includes the control panel and the associated electronic controls, allowing users to select and monitor the dishwasher's various cycles and functions. It is essential for interfacing with the dishwasher, providing buttons or touchpads to control the wash settings.

Over time, the console assembly can become worn out or damaged due to regular use, moisture exposure, or accidental impacts. 

Symptoms of a bad console assembly include:

• Unresponsive buttons or touchpads
• Display not illuminating or showing error codes
• Inability to start or stop cycles
• Inconsistent operation of dishwasher functions

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is the front console/control panel assembly for select laundry units. It provides the user-facing buttons and display area that houses and protects the controls, restoring a clean look and proper access to cycle selections.

• Houses the user interface and control selector areas on the appliance front
• Replaces a cracked, loose, or discolored console panel
• Helps resolve issues like broken mounting tabs, missing buttons, or difficulty operating controls
• Cosmetic damage or wear to the control area

• Disconnect power before servicing to avoid electrical shock
• Use care to transfer any existing electronics, knobs, or overlays if required by your model
• Keep track of screws and clips; support the panel to prevent cracking during removal/installation
• Verify proper alignment of harness openings and mounting points before tightening fasteners

Color: Ultimate Silver

This is the front control panel for the appliance's console. It houses the user interface and protects the electronic controls, restoring a clean look and proper button/selector operation when the original panel is damaged or worn.

• Provides the surface and mounting for the console's buttons and indicators
• Replaces panels that are cracked, discolored, loose, or unresponsive at the buttons
• Can help resolve issues like sticking keys or difficulty selecting cycles
• Cosmetic and functional refresh for a worn or broken console face

• Disconnect power to the appliance before servicing
• Open the door or access area to remove mounting screws from the existing panel
• Carefully transfer and reconnect any control board, keypad ribbon, or harnesses in the same orientation
• Test all functions before fully reassembling

Color: Black includes touchpad.

Color: Black

This user interface mounts in the dishwasher door and contains the keypad you press to choose cycles and options. Replacing a failing UI restores responsive controls and reliable communication with the main control so the cycle can start and run.

• Interprets button presses and sends signals to the electronic control to run the selected cycle
• Common symptoms: unresponsive or intermittent buttons, won't start, erratic lights/beeping, or only certain options work
• Issues may stem from moisture intrusion, a worn keypad, or a damaged ribbon connection

• Disconnect power at the breaker before servicing
• Open the door and remove inner-door/console screws to access the UI; support the panel to avoid strain
• Handle the ribbon cable carefully and observe ESD precautions; transfer any clips/insulators from the old part as needed
• Reassemble and test keypad functions before final tightening

This is the factory console assembly for the control area. It replaces a cracked or damaged panel and restores a secure, finished mounting surface so the appliance's knobs and switches stay aligned and operate correctly.

• Houses and supports the timer/controls so they mount securely
• Protects and organizes wiring within the control area
• Restores proper alignment for knobs and switches
• Replaces cracked, warped, or broken consoles that cause loose or misaligned controls

• Disconnect power before servicing; wear cut-resistant gloves when handling sheet-metal parts
• Remove control knobs and any retaining screws; lift off the old console
• Transfer your existing timer/control switches, brackets, and trim to the new console; take photos to document positions
• Reinstall and verify controls move freely and the console is firmly secured before restoring power

Color: Black

Console assembly replaces the appliance's front control panel, restoring a secure housing for the buttons and user interface so you can operate the machine reliably and protect internal electronics. What it does:

• Houses the user controls, button pads and display and provides the mounting location for the control board.
• Replaces cracked, broken or faded panels that make buttons hard to use.
• Addresses symptoms such as missing, sticky or hard-to-press buttons and visible console damage.
• Protects internal electronics from dust and impact while keeping controls accessible.

• Disconnect power to the appliance before beginning work to avoid electric shock.
• Follow the OEM service manual for disassembly and reassembly steps; console removal typically requires removing trim and fasteners.
• Handle display ribbons, connectors and the control board with care to avoid damage.

This is the adhesive label that covers your appliance's console. It restores clear, durable button and cycle markings so you can easily read and select settings while refreshing the look of the control panel.

• Adheres to the console to display cycle and option labels
• Helps protect the keypad surface from everyday wear
• Common symptoms: peeling or bubbling film, faded/illegible text, cracks, or lifting edges
• Cosmetic/labeling part that improves readability of the controls

• Disconnect power before servicing
• Remove the old overlay and clean the console surface of residue
• Carefully align with the console/keypad openings; once pressed down, it cannot be repositioned
• Apply pressure from center outward to ensure full adhesion

This electronic control board manages the dishwasher's settings and cycle operations, restoring responsive touch controls and reliable cycle sequencing so dishes are cleaned on the selected program. Replaces a failed or unresponsive console control module. What it does:

• Interprets user inputs and runs the dishwasher's programmed cycles.
• Controls timing, wash/dry functions, and interface feedback.
• Common symptom: touchpad or display unresponsive or erratic behavior.
• Common symptom: cycles fail to start, stop mid-cycle, or show error codes tied to control faults.

• One electronic control board (W10757829).

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Handle the board by edges to avoid ESD damage; use anti-static precautions if available.
• Some models require removing the control panel or inner door trim to access the board.

This console assembly is the appliance's user control panel that houses the display and touch/button interface, restoring normal control and feedback when the original console is damaged or unresponsive. What it does

• Replaces a damaged or cracked front control console so buttons and the display can be used reliably
• Restores responsive button/touch input when controls become unresponsive or sticky
• Fixes issues where the display is dim, unreadable, or not showing feedback from selections
• Helps resolve intermittent control behavior tied to a failed console interface

• One control panel (console assembly)

• Disconnect power to the appliance before beginning any repair to avoid shock
• Removal typically requires access to the appliance console and disconnecting the wiring harness; save all screws and fasteners
• Handle the new console carefully to avoid damage to the display or control surfaces

Color: White. Includes Active Overlay & Insert

Color: Black