Jolie October 18, 2013 for Model Number Whirlpool DU1100XTPS9 dishwasher History: Recently I noticed that all the screws were loose on on the inside of the dishwasher door, but the dishwasher still worked. Currently the start button will not respond when I try to start the dishwasher cycle (the lights go on, but the cycle won't start). I noticed a post that suggested "press heated dry, normal, heated dry, normal, heated dry, normal. The unit should start running, do not stop it, let it complete." I did this, (although I'm not sure what that does... resets something?) I let it complete it's cycle, however the unit still does not respond to start a normal wash cycle. Any suggestions?
1 Answer Hello Jolie. It sounds like the console is bad and will need to be replaced on the unit. Read More...
Ron July 29, 2013 for Model Number DU1100XTPS1 Hello! I have a Whirlpool quietpartner II with a dead control board. After removing the control faceplate and popping off the plastic cover from the top of the board...I noticed a black wire not connected to anything, and it appeared to be charred. Also, one of the plugs that go into the board had a wire that was fried. The board looked discolored where that wire touched the board. So my question...Can I replace the control board and wiring assembly that connects to the board? I'm sure there would be some wire splicing, but it seems doable to me.
1 Answer Hello Ron. Yes, You can replace the board and repair the wiring in the unit. Make sure anything that is burnt get repaired/replaced in the unit. Read More...