Customer Questions and Answers for Refrigerator Ice Container Assembly by Whirlpool

Hello Ray! Yes, the ice container assembly WP2258236 is the correct assembly used on your model KSRG25FKBL15. Thanks!

Lisa, A model number would've been helpful. You may want to check and make sure the cubes are not " clumping" together, and causing a jam or clog. The cubes can stick together when there is an abundance of ice, the freezer temperature is below 0 dgrs. Usually, an ice dispenser bin will make noise if the blades are damaged or loose, and you may see white plastic chips in a glass. You're also going to need to check the ice dispenser flapper door in the dispenser housing(front) to make sure it opens and closes properly, and if you have a crushed ice option, make sure the :crusher door on the front of the ice bin, operates properly as well.

Hi Greg. If you have full pressure water supply at the dispenser, then you need to manually cycle the ice maker. Set your volt/ohm meter part # MA-DM1, on the ice maker water valve's terminals. Then us a jumper in the "t" and "h" and as the dial moves the ice maker h\ead will send approx. 6-sec./ 120 vac to the water valve. If your ice maker sends the proper voltage (as you watch the meter) and the water valve part # W10408179 does not send the water , then you replace it. Make sure the water inlet tube is clear for water to enter the ice maker . Thank You.