Customer Questions and Answers for Control Board by Whirlpool

Hello Bryan. First thing to check is the leveling of the unit. If it's out of level it will cause the door strike to be off and this will sometimes keep one of the door switches from closing. If unit is level, the next step is to check connection between the main control and the user interface. Before you open the door panel, turn the breaker off to the unit at the breaker box. when you access the control board, unplug and reconnect each connector to ensure and turn the breaker back on. If this doesn't correct the problem, the control WP8051136 is going to require replacement.

HI 6RV. Are your water "jet- holes" plugged on your spray arms? You can carefully remove the spray arms and clean them inside and out with a pick tool in the sink. Is your lower pump filter assembly screen clogged with debris? You can carefully go into the top-side of the pump and clean out the filter. There are dishwasher cleaning agents that you use monthly to keep optimum performance. Like dishwasher cleaner part #TJ104. Or Glisten part # is W10549845. Thank you.

Hello Frank. Check and see if there is power to the motor. If so, and the motor is not running, you will need to replace the motor W10428773. Hope this helps.