Trent April 04, 2011 for Model Number 110.84832201 Hi, I replaced my rollers, belt, and pulley. When I put it all back together, the lights work, but beeps once when I press start; the motor doesn't fire. I have checked the thermal fuse, door switch, pulley switch and all are good. Does this mean electronic board (AP3604453) is shot? Maybe ribbon cables? The machine worked before I took it apart!
1 Answer Hello Trent. There is a switch 279782 located at the motor, that the belt tension activates. If this switch is not making up correctly, it will cause the dryer not to run. You will need to disassemble the belt and make sure the switch is making up correctly with the belt installed. Hope this helps. Read More...
Jim March 30, 2011 for Model Number 110-92824101 I have lost the ability to select delecate, casual, normal, jeans, heavy duty. Which item do I need to buy to get it to work on the above settings?
2 Answers Hello Jim. You will need to replace the control panel WP8529879, if the selections are not working properly. Hope this helps. Read More...
Jim March 30, 2011 for Model Number 110-92824101 I have lost the ability to select delecate, casual, normal, jeans, heavy duty. Which item do I need to buy to get it to work on the above settings?
2 Answers Hello Jim! You will need to replace the electronic control panel assembly. For white order WP8529879. For black order WP8529881. For bisque order WP8529880. Thanks! Read More...
1 Answer Hello Leah. Test the thermal fuse and see if it is blown. Also test the door switch as well. We will need your model number to help you with this. Thanks. Read More...
Duane K February 28, 2011 I replaced the board in my maytag dryer and it went out after about a weeks time. Any suggestions?